Help - Search - Member List - Calendar
Full Version: BitComet Thread V2
Lowyat.NET > Computers > Software > Internet Related
Pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
xXAaronXx
Use utorrent
tan_pang
QUOTE(binks @ Jun 13 2008, 10:33 AM)
Hi Guyz ...

anybody had this issues ...
I'm using windown XP pro.
running Bitcomet 0.93 verison.
recently I have this wierd pop-up whenever the bitcomet is runnig.
i have it screen shot.
kindly help em to figure it out. ...

i check the system .. no malware nor spyware.
*


How about update your BitComet to latest version??
sychern
QUOTE(GrandElf @ Apr 12 2008, 12:16 PM)
[attachmentid=441031]

[attachmentid=441033]
Based on the 2 picture...can anyone tell me did i set up my bitcomet properly??if so then how come my listen port still being block??
from the 1st pic....i did get local n remote in my peers n tats mean i already portforward properly right??
but from the 2nd pic.....how come i only get remote in my peers??

i did check my portforwarding, my firewall, n even reset my router or restart my com......but this problem still occurs.....pls help....and if u dun c a problem with it pls notify me as well......thanks for ya time...... notworthy.gif  notworthy.gif
*



I came accross this and hope can help:

http://85.17.184.130/forums/index.php?showtopic=40775
Suk
any know what is the latest version which is very stable ?
tan_pang
QUOTE(Suk @ Jun 16 2008, 03:49 AM)
any know what is the latest version which is very stable ?
*


Before I use v1.02, I use v1.00

v1.00 is stable, but in v1.02, when exit the BitComet, an error message will shown regarding to regedit...
teckhooi
I Am Using 2008530 Version

Fix 4
navilink
QUOTE(Suk @ Jun 16 2008, 03:49 AM)
any know what is the latest version which is very stable ?
*

bitcomet has been stable in any version i've used so far...now using v1.02 rclxms.gif
tan_pang
QUOTE(teckhooi @ Jun 18 2008, 04:52 PM)
I Am Using 2008530 Version

Fix 4
*


Hmm... is that beta version??

v1.02 release on 3/6/2008... I suggest you to update to the latest stable release...
Grand Inquisitor
v1.02 is beta version if i'm not mistaken.
tan_pang
QUOTE(Grand Inquisitor @ Jun 20 2008, 10:42 AM)
v1.02 is beta version if i'm not mistaken.
*


What are you talking about?? doh.gif

That is latest version!
not beta version!!
d12fren87
a yellow light appears in the bottom right corner of my bitcomet.
when my pointer moves on it it says
your listen port is blocked.you can still download but the speed may not be very fast.please check your firewall and NAT router configuration.
what hsould i do now?
tan_pang
QUOTE(d12fren87 @ Jun 21 2008, 08:27 PM)
a yellow light appears in the bottom right corner of my bitcomet.
when my pointer moves on it it says
your listen port is blocked.you can still download but the speed may not be very fast.please check your firewall and NAT router configuration.
what hsould i do now?
*


If like that
then try check your speed...

If your download speed is fast, then ignore the yellow light because it is possibly false alarm...

Else, if your speed is slow, then go to look at the 2nd post of this thread.

QUOTE
Portforward and allow BitComet connection in firewall
d12fren87
QUOTE(tan_pang @ Jun 21 2008, 09:20 PM)
If like that
then try check your speed...

If your download speed is fast, then ignore the yellow light because it is possibly false alarm...

Else, if your speed is slow, then go to look at the 2nd post of this thread.
*



my download speed sometimes fast sometimes slow.
upload speed all the time fast one.
i did portforward d
but still the same.
sandcool
sorry..wanna ask now bitcomet downloading is slow as compare to previous day...
and also can bitcomet be used in singapore?
tan_pang
QUOTE(d12fren87 @ Jun 21 2008, 11:06 PM)
my download speed sometimes fast sometimes slow.
upload speed all the time fast one.
i did portforward d
but still the same.
*


Since that the upload is fast, then it probably mean you have did portforward and firewall have allow the BitComet connection...

It is better you limit your upload speed like what I have posted in Post#2...
If it is still slow, blame the peer and our ISP
QUOTE(sandcool @ Jun 22 2008, 12:52 AM)
sorry..wanna ask now bitcomet downloading is slow as compare to previous day...
and also can bitcomet be used in singapore?
*


I'm not sure about the speed since that I didn't download anything nowadays...

But if I'm not mistaken, Singapore doesn't allow P2P... once you use it, get caught... and I don't know what will happen...
d12fren87
I get my greenlight already.yeah~!!!the portforwarding guide in the website is not complete for my Dlink DSL-520t modem,thts y i cant get green light b4 this.it misses the last step.
wanna ask
if i din do port forwarding,does it means tht my upload speed will not be the fastest possible???
so portforwarding affect both upload and download?
-vip3rleon9-
so which is the recommended BC version now? i'm still running the 7.0. tongue.gif
d12fren87
eh........how come i cant change the new half open limit one????
the option seems like disabledhow to change fix it?
tan_pang
QUOTE(d12fren87 @ Jun 22 2008, 02:33 PM)
I get my greenlight already.yeah~!!!the portforwarding guide in the website is not complete for my Dlink DSL-520t modem,thts y i cant get green light b4 this.it misses the last step.
wanna ask
if i din do port forwarding,does it means tht my upload speed will not be the fastest possible???
so portforwarding affect both upload and download?
*


If you never portforward, it mean your router will still block the port your BitComet using...
both download and upload will be affected...
QUOTE(-vip3rleon9- @ Jun 22 2008, 10:32 PM)
so which is the recommended BC version now? i'm still running the 7.0. tongue.gif
*


I'm running v1.02
It is quite stable when downloading and uploading, but when closing BitComet will show me an error...

I wondering is there anyone using the same version facing the same problem too?

I use v1.00 last times, no problem and quite stable. You can try that...
QUOTE(d12fren87 @ Jun 23 2008, 12:17 AM)
eh........how come i cant change the new half open limit one????
the option seems like disabledhow to change fix it?
*


What the BitComet version you using and what is your computer OS??
d12fren87
QUOTE(tan_pang @ Jun 23 2008, 12:56 PM)
If you never portforward, it mean your router will still block the port your BitComet using...
both download and upload will be affected...

I'm running v1.02
It is quite stable when downloading and uploading, but when closing BitComet will show me an error...

I wondering is there anyone using the same version facing the same problem too?

I use v1.00 last times, no problem and quite stable. You can try that...

What the BitComet version you using and what is your computer OS??
*


1.02
XP sp2 lo.
tan_pang
QUOTE(d12fren87 @ Jun 23 2008, 06:37 PM)
1.02
XP sp2 lo.
*


Hmm... it should be able to change it...
Please try again
d12fren87
really tried the option seems like disabled like tht.
cannot touch anything at all
tan_pang
QUOTE(d12fren87 @ Jun 23 2008, 09:21 PM)
really tried the option seems like disabled like tht.
cannot touch anything at all
*


Can do a print screen??
punkyswat
QUOTE(tan_pang @ Jun 24 2008, 01:16 AM)
Can do a print screen??
*



i am using 1.02v.can u update the thread for me?
x-death-x
im also use bitcomet...suddenly have problem...bitcomet close itself within 10 minute...why ha?using vista basic and bitcomet 1.02....also cannot set the tcpip thing anymore....help me
chungwf
Hi all,dunno wat button i have pressed,all my d/l files in Bitcomet are gone before finish d/l.I have no idea to get them back as i need to go to the web and search for them again.Did anyone of u experienced this b4?I really need your help if can retrack back all my torrent file in Bitcomet without searching through the web all over again.Thanks!
x5_416
u can find all the torrent files u've downloaded inside the folder BitComet\Torrents
d12fren87
here is the print screen.
yelsew
QUOTE(tan_pang @ Jun 23 2008, 12:56 PM)
I'm running v1.02
It is quite stable when downloading and uploading, but when closing BitComet will show me an error...

I wondering is there anyone using the same version facing the same problem too?

I use v1.00 last times, no problem and quite stable. You can try that...

*



I'm using 1.02 now, never had that problem tho?? blink.gif

May be it's other programs that conflict with your bitcomet? or try to do some reg cleaning


QUOTE(d12fren87 @ Jun 26 2008, 10:54 PM)
here is the print screen.
*



If you have applied 3rd party tcp/ip patch then there is no need to apply the bitcomet patch anymore
e.g. EvID4226Patch223d-en http://www.lvllord.de/?lang=en&url=downloads



Btw, tan_pang, can please update my bitcomet version at the first page? I have upgraded to 1.02, thanks.
MAAG
I'am using v0.66 (modded version)...their dl speed beyond my 3G speed....
-vip3rleon9-
QUOTE(tan_pang @ Jun 23 2008, 12:56 PM)
I'm running v1.02
It is quite stable when downloading and uploading, but when closing BitComet will show me an error...

I wondering is there anyone using the same version facing the same problem too?

I use v1.00 last times, no problem and quite stable. You can try that...
*

hmm.gif I think I shall give V1.0 a try.

Thanks.

wink.gif
punkyswat
QUOTE(-vip3rleon9- @ Jun 29 2008, 03:59 PM)
hmm.gif I think I shall give V1.0 a try.

Thanks.

wink.gif
*



i am using 1.02.no problem on that.stable too
yelsew
I just got one question.... how much memory usage for the bitcomet version 1.02?

I found out that it's still increasing by time although the amount increases is very small compare to version 0.9x
jiant
can't up my BT speed...why i use Bitcomet 1.02 with port forward
-vip3rleon9-
QUOTE(punkyswat @ Jun 29 2008, 04:17 PM)
i am using 1.02.no problem on that.stable too
*

hmm.gif Maybe I should. I can't receive "remote" connections. Did port forwarding and followed all instructions on the first post. Could it be hardware (modem router) or software (antivirus etc)?
punkyswat
how to disable the ads?
Vaiz
Right now im using BitComet 0.82. The problem im facing is when im downloading a torrent, my internet connection speed will be extremely slow, i can say it almost cant open any pages, after i stop the torrent only back to normal speed. Why this happens, please advise thank you.
littleman
Because you have limited bandwidth.

Try Cfospeed traffic shaping.
Vaiz
First, i've just check CfosSpeed site and i've read some forumer said that this software can boost internet speed, maintain low ping in online games, fast downloads but theres a few individual said it doesnt affect bitcomet download speed... And im a streamyx 88 per month package so which one i should download?

Second, why during noon till midnight bitcomet download speed is so slow, limited bandwidth also?
SyberXII
try to google it...
plus, if u wana increase the speed of downloading the files, u can try to register as a member at the lower left there. smile.gif
maniac_rage
Hey guys! I got some problem here. I dunno how to play the files. All the files end with an r followed by 2 numbers (eg: ro1, ro2, r03...etc). One of the files ended with .rar. What should I do to watch the movie? Sorry...Im a noob in these kind of things.... sweat.gif
yelsew
QUOTE(Vaiz @ Jul 6 2008, 02:39 AM)
Right now im using BitComet 0.82. The problem im facing is when im downloading a torrent, my internet connection speed will be extremely slow, i can say it almost cant open any pages, after i stop the torrent only back to normal speed. Why this happens, please advise thank you.
*



try to limit your upload and download speed if you wish to surf smooth while you are downloading.
for e.g. 1mb package, you can limit the upload to 24KBps. And try to limit the number of connections per task also.

or u may try the latest version of bitcomet 1.02

QUOTE(Vaiz @ Jul 7 2008, 01:30 PM)
First, i've just check CfosSpeed site and i've read some forumer said that this software can boost internet speed, maintain low ping in online games, fast downloads but theres a few individual said it doesnt affect bitcomet download speed... And im a streamyx 88 per month package so which one i should download?

Second, why during noon till midnight bitcomet download speed is so slow, limited bandwidth also?
*



cfosSpeed does help a bit in a way or so, but depends on how is the situation. FYI, cfosSpeed still couldn't handle too much connections simultaneously.

if the speed always drop during that period of time... could b possible cause of throttle... but i'm not too sure on that... which area you in btw?



QUOTE(maniac_rage @ Jul 8 2008, 02:38 PM)
Hey guys! I got some problem here. I dunno how to play the files. All the files end with an r followed by 2 numbers (eg: ro1, ro2, r03...etc). One of the files ended with .rar. What should I do to watch the movie? Sorry...Im a noob in these kind of things....  sweat.gif
*



you need to download and install programs like WinRar or 7zip to extract the content first. Those .r01... until .rar are multiple archives compression.

to get 7zip (it's a freeware): http://www.filehippo.com/download_7-zip/3541/

just install as normal program, then after complete installation, right click on the .rar file and choose extract here.
pspknightx
Guys, i need some help about BitComet.

Currently I'm using Window XP Home Edition SP3, Bitcomet 1.02 and Tmnet Streamyx 1mbps package.
How do I turn the listen port become green which shown in the picture below?
I remembered last time I did it and the download speed is extremely fast (70~100kb/s) as i can receive from local and remote.
I'm now receive all Local only and the speed is around 30~39kb/s , sometime will reach 50kb/s but just a while only sad.gif


user posted image
tan_pang
QUOTE(pspknightx @ Jul 10 2008, 12:47 PM)
Guys, i need some help about BitComet.

Currently I'm using Window XP Home Edition SP3, Bitcomet 1.02 and Tmnet Streamyx 1mbps package.
How do I turn the listen port become green which shown in the picture below?
I remembered last time I did it and the download speed is extremely fast (70~100kb/s) as i can receive from local and remote.
I'm now receive all Local only and the speed is around 30~39kb/s , sometime will reach 50kb/s but just a while only sad.gif
*


Have you portforward and make your BitComet connection allowed in Firewall??
-vip3rleon9-
I'm experiencing the same problem as pspknightx.

Followed portforward.com's instructions and allowed BitComet in all firewall applicatoins. However, still no avail.

hmm.gif
Vaiz
QUOTE(yelsew @ Jul 8 2008, 08:09 PM)
try to limit your upload and download speed if you wish to surf smooth while you are downloading.
for e.g. 1mb package, you can limit the upload to 24KBps. And try to limit the number of connections per task also.

or u may try the latest version of bitcomet 1.02
cfosSpeed does help a bit in a way or so, but depends on how is the situation. FYI, cfosSpeed still couldn't handle too much connections simultaneously.

if the speed always drop during that period of time... could b possible cause of throttle... but i'm not too sure on that... which area you in btw?

*



Hmm i've limit my download speed to 50 and upload speed to 25 is it okay for one to two task per night? CfosSpeed is not freeware is there any other recommendation or where can i get this software? Im at ampang area...
yelsew
QUOTE(pspknightx @ Jul 10 2008, 12:47 PM)
Guys, i need some help about BitComet.

Currently I'm using Window XP Home Edition SP3, Bitcomet 1.02 and Tmnet Streamyx 1mbps package.
How do I turn the listen port become green which shown in the picture below?
I remembered last time I did it and the download speed is extremely fast (70~100kb/s) as i can receive from local and remote.
I'm now receive all Local only and the speed is around 30~39kb/s , sometime will reach 50kb/s but just a while only sad.gif
user posted image
*



May be you can try to limit the number of connections per task? Or the upload limit to a lower value?



QUOTE(Vaiz @ Jul 10 2008, 11:24 PM)
Hmm i've limit my download speed to 50 and upload speed to 25 is it okay for one to two task per night? CfosSpeed is not freeware is there any other recommendation or where can i get this software? Im at ampang area...
*



When there is no one surfing, you can always set the download speed to unlimited, while maintain your upload speed around 24KBps.
As for the other question... better google to find out brows.gif
unknown
Anyone have same problem,

I download and update 2 file from Windows Update, after finish installation and restart, I run Bitcomet with no problem but my IE/Firefox can't surf net.

Anyone know how to fix this problem, before i do windows update, My BT and Firefox can run on same time.

teckhooi
Who Got The Lastest Beta Version

Or Call Modified Version?
JavaKom09088
QUOTE(unknown @ Jul 11 2008, 08:22 PM)
Anyone have same problem,

I download and update 2 file from Windows Update, after finish installation and restart, I run Bitcomet with no problem but my IE/Firefox can't surf net.

Anyone know how to fix this problem, before i do windows update, My BT and Firefox can run on same time.
*



yea ! same problem here ! wat's wrong with the update ? is anyone there know how to fix this problem ???
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
All Rights Reserved 2003-2006 Vijandren Ramadass
Invision Power Board © 2001-2009 Invision Power Services, Inc.