Try using Rightmark CPU clock to see the VID, but be careful you don't set anything accidentally.... very powerful program...

I cannot open it in Vista 64bits.

-pWs-

bro kmarc, did u experience double boot/double POST on your P35 BI ?

It is common issue since 965 chipset according to one forummer.

-pWs-

Thank you bro,you're the man...

I need to ask more here.The multiplier to OC,just set it to 9 right? or do i need to set it to other figure??

Go the the max multiplier your processor supports.

-pWs-

Hi all, newbie reporting in.
Gotten myself a DK P35 T2RS recently but don't have time to it set up as I'm busy with my final exams.
Anyway, hope things will be going smooth tomorrow when I'm back at home setting up my new rig.
By the way, I plan to start with some mild OC during my semester break so looking forward to learn from the pros here.

Owh..... use Win XP ler....



Yup. It's on my 2nd rig. Don't dare to flash the BIOS as I might get a dead mobo like what happened to my DS3....

how did the double post look like on your BI ?

When I switch on the rig, the rig would startup but no screen display.... it will then switch off and restart normally....

My computer also like this wor every time i turn on.

-pWs-

Eh, new mobo right? Maybe your bios is not updated?

Latest wor...I thought that is normal for overclocked pc.

-pWs-

Hmmm.... I had that problem with my DS3 previously too.

Overclocked rig + DS3 + crucial ballistix - no problems

Overclocked rig + DS3 + 10th anni - double-booting....

I can't remember whether the double-boot occurred if the 10th anni was at stock.....

Owhh...weird.

-pWs-

switch off automatic and restart itself?

Yup. Automatic..... good eh?

my case is once switch back to stock... i mean no OC... everything will be normal... no double post and so on... if change fsb it will double post...

I think your case is normal



I did some tried and found that, when I oc my E6550 to 3.1Ghz and above, it will experience double POST in diff. case which I stated in my previous post.

Even if you updated the BIOS to the latest one?

ya, using the latest bios now, and the same sign.

yes, i shut down the system and remove the power plug everytime i went out.

the orange LED was shut off when power plug is removed.

i got a question to ask.. my OC options there at bios dun hav vcore adjust just got cpu VTT voltage default at 1.2V nia.. how i get the settings?

After installing everything,i found that my DK have a problem.I can't install the audio driver.Always appear error.

that's weird... are you sure that you didn't see the CPU voltage? double check and recheck... even better if you can get a picture of your BIOS
what's your BIOS version anyway...?


what do you mean always appear error? did you enable the HD Audio/Onboard Audio in the BIOS? are you sure that you get the correct audio driver? if i'm not mistaken it's Realtek

I installed from the DFI cd driver bro.Its still the same problem occurred.I tried to download the driver,also the same happening.

Same2


Eh...should got a lot of voltage setting ma


Ermmm...What error is that?

-pWs-

Finally, I get my new rig up and running.
No double POST problem with stock settings.
Will start some mild OC during the coming semester break to check for the double POST problem mentioned above and to have some fun.
By ther way, I can't seem too find any buzzer/speaker for the motherboard. Is it not included in the standard packaging of DK P35-T2RS?
Therefore, I only left with the choice of onboard LED diagnostic for troubleshooting. EDIT: which I'm not very convenient with.

My rig also having sort of "dual-bootup" which you guys mentioned. It will power-up, power-down and then automatic power-up again to boot. Previously I doesn't experience this, but ever since I changed the voltage of my VCore and VDimm for overclocking, this starting to happen. I guess it is the motherboard adjusting the voltage everytime during bootup?

I dont think so... I got tried use the same setting and voltage for oc 3.5GHz applied to 3.0GHz, no double post.

the CPU Voltage in DFI BIOS called CPU Voltage Special Add


, IIANM, there's no speaker/buzer bundled with the board, normally comes with the case

for dual boot thingy, i used to have this on all (yes... all BIOS version on DFI), same as my previous board, Foxconn Mars as well as Abit IP35-E, i checked with my brother's MSI P35 Platinum and Asus P5K-EPU... same... double boot, so i take it as... P35's common operation

as for now, the dual boot thingy reoccured when i completely shutdown my system, not the soft-reboot, it's the hard-reboot...

My current rig with the gigabyte P35-DS3 don't have wor..... however, if I switch to 10th anni, I'll get the double-boot too!!!

:nlink:, uiks... now that's weird... :jmm:

@anyone
have you guys tried Boot Up Clock? i set mine @400 though...

what is boot up clock? this is my 1st time i heard it. (sorry for noob question )

Hmmm.... I will try it out later.... as far as I remember, I get double boot from the first time I got the mobo i.e. everything at stock initially....



You can set the mobo to boot up at a lower FSB before it overclocks to your OC FSB.....

Hmm, it's kinda weird as I myself seems to have the feeling that I've seen the buzzer before the rig is fully completed.
However, I can't find it anywhere when I'm doing the finishing touches yesterday.
Can anyone tell me does the CM690 casing comes with the buzzer? If it's true, then I might have lost it.
By the way, is the buzzer available for sale at LYP/IMBI?
Thanks.

you mean your ballistix dun have dual boot but 10th anni got?

Yup. Dunno why.....

Its like this on the way installing.

[attachmentid=474002]

I don't know whats happening.Even i also tried to download the other audio driver from DFI website,also failed to install.

er....this might not be a good suggestion but have u reformatted? cos last time i tried to use teh mobo without reformatting and in teh end i keep on got failure n bsod here n there...

Thank friend.My problems solved after i bought a new OS and installed it.

yes u need reinstall OS 1st after change mobo..coz all driver already different with previous mobo...

hey bro... btw... can i ask how is ur q6700 OCing?

any better than q6600?

bought this board yesterday the Chipset and PWM temp is really high. any suggestions to improve PWM temps? and yea, i'm planning to install an NB cooler for it. will the Thermalright HR-05 fit nicely when using an OCZ Vendetta 2 cooler?

here's a shot

[attachmentid=480598]

i'm using HR-05 with True, with true blowing towards the exhaust fan.

no ideas how the OCZ cooler looks like

may i know is it the bios that came out the box doesnt hav the cpu voltage adjustment option? coz mine i cant find it. is it because i didnt plug in the FDD power connector that the manual said its optional?

if u wanna save cost u can jus mod abit bro..make fan holder from arcylic to hold 40mm fan to blow ur NB..i did it on my SB n NB..hehe but forgot lastime on DK..on UT its 45c load for NB

problem kinda fixed bro, turns out my casing airflow is really bad. now temps are great at the expense of noise (using high cfm delta fans )
[attachmentid=483044]

waaa not bad..but the case will b like tornado ah?

you got that right bro, really noisy