Full Version: DFI LANPARTY DK P35-T2RS
i think im fall in love with this mobo liao~
wait till you fall in love with its PWM 
anyways its a beautiful board no doubt.
anyways its a beautiful board no doubt.
hey guys..have u tweak this mobo dy?how far u can go with this fsb?sniper done tweak the bios for ur e2140? 
QUOTE(mfcm @ Feb 9 2008, 07:17 AM)
hey guys..have u tweak this mobo dy?how far u can go with this fsb?sniper done tweak the bios for ur e2140?
so far tweaking those
32M SuperPI passed
3.2GHz - 1.5000VCore
DDR2 801MHz - 2.0VDIMM
NB - 1.5100V
SB - don't remember
tried Primed?
... auto-reboot 
but, i'm not understand what is GTL or whatsoever
QUOTE(sniper69 @ Feb 9 2008, 10:24 AM)
so far tweaking those
32M SuperPI passed
3.2GHz - 1.5000VCore
DDR2 801MHz - 2.0VDIMM
NB - 1.5100V
SB - don't remember
tried Primed?... auto-reboot
but, i'm not understand what is GTL or whatsoever
32M SuperPI passed
3.2GHz - 1.5000VCore
DDR2 801MHz - 2.0VDIMM
NB - 1.5100V
SB - don't remember
tried Primed?
... auto-reboot but, i'm not understand what is GTL or whatsoever
your e2140 can do how far on the MARS before?
QUOTE(gsan @ Feb 9 2008, 10:44 AM)
your e2140 can do how far on the MARS before?
, never got a chance to try E2140 on Mars le... sold Mars long before i got E2140 
QUOTE(gsan @ Feb 9 2008, 10:44 AM)
your e2140 can do how far on the MARS before?
dude thats because ure limited by NB strap..
Below is my screenshot... Run Prime95, Super PI 32M
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help.. 
Any solutions...???
My RAM is Ballistix DDR2 1066Mhz.
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help..
Any solutions...???My RAM is Ballistix DDR2 1066Mhz.
QUOTE(-=J4cKa5s=- @ Feb 9 2008, 12:29 PM)
Below is my screenshot... Run Prime95, Super PI 32M
http://img182.imageshack.us/img182/1843/6600wifdfixx4.jpg
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help.. Any solutions...???
My RAM is Ballistix DDR2 1066Mhz.
http://img182.imageshack.us/img182/1843/6600wifdfixx4.jpg
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help..
Any solutions...???My RAM is Ballistix DDR2 1066Mhz.
too small dude, can't see anything...
QUOTE(-=J4cKa5s=- @ Feb 9 2008, 12:29 PM)
Below is my screenshot... Run Prime95, Super PI 32M
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help.. Any solutions...???
My RAM is Ballistix DDR2 1066Mhz.
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help..
Any solutions...???My RAM is Ballistix DDR2 1066Mhz.
reduce strength on rams
u have no choice since ure strap limited on this mobo.
QUOTE(sniper69 @ Feb 9 2008, 12:43 PM)
too small dude, can't see anything...
Paiseh sniper
Oredi post the screenshot again....
Added on February 9, 2008, 2:40 pm
QUOTE(cstkl1 @ Feb 9 2008, 01:02 PM)
reduce strength on rams
u have no choice since ure strap limited on this mobo.
u have no choice since ure strap limited on this mobo.
Wat is tat, mind to enlight me? Issit i should not use 1:1 divider???
Noob in OC la.... hehe
QUOTE(-=J4cKa5s=- @ Feb 9 2008, 12:29 PM)
Below is my screenshot... Run Prime95, Super PI 32M
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help.. Any solutions...???
My RAM is Ballistix DDR2 1066Mhz.
Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help..
Any solutions...???My RAM is Ballistix DDR2 1066Mhz.
bro have tried 400x8?u try 400x8 1st c stable or not.if stabel then try get 400x9
QUOTE(-=J4cKa5s=- @ Feb 9 2008, 02:39 PM)
Paiseh sniper
Oredi post the screenshot again....
Added on February 9, 2008, 2:40 pm
Wat is tat, mind to enlight me? Issit i should not use 1:1 divider???
Noob in OC la.... hehe
Oredi post the screenshot again....
Added on February 9, 2008, 2:40 pm
Wat is tat, mind to enlight me? Issit i should not use 1:1 divider???
Noob in OC la.... hehe
for ure mobo i think they call it delay something in ure dram timings.. channel something..
take it like this 400 bus strap 333.. light/moderate strength is equivalent to 400 bus strap 400 aggressive/more aggresive strength..
difference is VcMH.. lower on strap 400.
lowest tRD settings easier on strap 400.
a friend of mine (requesting my BIOS setting and i think it is best to post up here , the setting isn't 100% stable though since not yet priming... but i can say it's quite stable since i can even game ±2 hours with it...
* it might differ from BIOS, Processor characteristic... so... pardon me if any trouble i caused
, the setting isn't 100% stable though since not yet priming... but i can say it's quite stable since i can even game ±2 hours with it... * it might differ from BIOS, Processor characteristic... so... pardon me if any trouble i caused
» Click to show Spoiler - click again to hide... «
QUOTE(cstkl1 @ Feb 9 2008, 03:09 PM)
for ure mobo i think they call it delay something in ure dram timings.. channel something..
take it like this 400 bus strap 333.. light/moderate strength is equivalent to 400 bus strap 400 aggressive/more aggresive strength..
difference is VcMH.. lower on strap 400.
lowest tRD settings easier on strap 400.
take it like this 400 bus strap 333.. light/moderate strength is equivalent to 400 bus strap 400 aggressive/more aggresive strength..
difference is VcMH.. lower on strap 400.
lowest tRD settings easier on strap 400.
sounds interesting... can explain more about it? thanks
QUOTE(gsan @ Feb 9 2008, 11:00 PM)
sounds interesting... can explain more about it? thanks
try it..
reduce ure strength.. increase ure trd.. this will reduce ure NB also ure overshoot hence u can adjust ure gtl better..
later when u found the perfect fsb( vtt termination) aka ht link voltage.. u can up it and ure NB.. till then dont dude..
its a marginal gain from strength.. u can do better bandwidth gain from dram timings.. so just leave it at relax or more relax...
hmm weird lar.. i have been seeing soulfly .. aka moderator been telling everybody about y rams die or degrade.. aka talking about strength..
nobody seems to be paying attention to him..
geee i feel u bro..
and for 4 ram stick.. use that channel setting to change some trds on different stick.. get better stability..
hmm unless somebody can post ure bios screenshot i can point out for u
ive seen the LP UT version..
i am sure they didnt take out the dram strengths..
cause ure mobo hangs.. aka u guys assume its vcore etc.. but sometimes.. just sometimes.. its actually the mem for bus..
or vtt termination...
thats y so many ppl are getting different vcores .. i mean a lot of difference on same proc with same batch.. even some on different mobo's ( stupid reviewers this part.. plug and play sponsered monkeys)
when they compare mobo they say this mobo can get this much bus or vcore etc and the other less...
just wanna ask . this mobo compatible wit vista ? anyone using this wit vista ? and compatible wit crucial ballistix tracer rams ?
QUOTE(avengers88 @ Feb 10 2008, 01:41 PM)
just wanna ask . this mobo compatible wit vista ? anyone using this wit vista ? and compatible wit crucial ballistix tracer rams ?
wat u mean by compatible issue?im running tracer on it..jus didnt use vista yet as im still tweak it
my mobo has a really serious vcore issue...i've set the vcore in bios as 1.40v (1.25V + 150mV)...vdrop to 1.37v...then vdroop to 1.32v...really hope there will be a volt-mod or some work around on this...this really shock me coz last time wif my DQ6, the vdroop as good as zero.
btw...do you guys plug in the floppy power molex to the FDP?
btw...do you guys plug in the floppy power molex to the FDP?
QUOTE(remysix @ Feb 10 2008, 02:18 PM)
my mobo has a really serious vcore issue...i've set the vcore in bios as 1.40v (1.25V + 150mV)...vdrop to 1.37v...then vdroop to 1.32v...really hope there will be a volt-mod or some work around on this...this really shock me coz last time wif my DQ6, the vdroop as good as zero.
btw...do you guys plug in the floppy power molex to the FDP?
btw...do you guys plug in the floppy power molex to the FDP?
wow bro..its bigger vdrop..i've set mine 1.312v in bios n load 1.296v..not dat much vdrop compare to u
bout floppy i didnt use floppy..myb others can tell 
QUOTE(mfcm @ Feb 10 2008, 02:22 PM)
wow bro..its bigger vdrop..i've set mine 1.312v in bios n load 1.296v..not dat much vdrop compare to u bout floppy i didnt use floppy..myb others can tell
bout floppy i didnt use floppy..myb others can tell yup...it's a big diff and really not gonna help me in ocing...i need to 'inteligently calculate' the vcore that i'd need to set in bios to achieve my target...
not that floppy disk drive la bro
...there's a power connector on the box itself called 'FDP'...u can use ur floppy power molex to supply extra power to the mobo...according to the manual, it is meant to supply extra power to stabilize the system when u go for dual gfx. this DK is my second mobo from DFI...last time used the LP UT nF4 Ultra-D...got the same thing. and most people would recommend to plug the power in to help stabilize ur oc.so, just wanna check whether u guys plug it or not?
QUOTE(remysix @ Feb 10 2008, 02:29 PM)
yup...it's a big diff and really not gonna help me in ocing...i need to 'inteligently calculate' the vcore that i'd need to set in bios to achieve my target...
not that floppy disk drive la bro ...there's a power connector on the box itself called 'FDP'...u can use ur floppy power molex to supply extra power to the mobo...according to the manual, it is meant to supply extra power to stabilize the system when u go for dual gfx. this DK is my second mobo from DFI...last time used the LP UT nF4 Ultra-D...got the same thing. and most people would recommend to plug the power in to help stabilize ur oc.
so, just wanna check whether u guys plug it or not?
not that floppy disk drive la bro
...there's a power connector on the box itself called 'FDP'...u can use ur floppy power molex to supply extra power to the mobo...according to the manual, it is meant to supply extra power to stabilize the system when u go for dual gfx. this DK is my second mobo from DFI...last time used the LP UT nF4 Ultra-D...got the same thing. and most people would recommend to plug the power in to help stabilize ur oc.so, just wanna check whether u guys plug it or not?
kekeke then my bad..
lastime u plug the fdp?help to stabilize ur oc bro?i didnt plug it..but if help much to stabilize oc then i wud to plug it later
QUOTE(remysix @ Feb 10 2008, 02:18 PM)
my mobo has a really serious vcore issue...i've set the vcore in bios as 1.40v (1.25V + 150mV)...vdrop to 1.37v...then vdroop to 1.32v...really hope there will be a volt-mod or some work around on this...this really shock me coz last time wif my DQ6, the vdroop as good as zero.
btw...do you guys plug in the floppy power molex to the FDP?
btw...do you guys plug in the floppy power molex to the FDP?
really? then i'm really dissapointed with this DK
QUOTE(gsan @ Feb 10 2008, 03:32 PM)
really? then i'm really dissapointed with this DK
Donkey Kong
@remysix, mfcm
i plugged in the Floppy Power, like i used to with SLI-DR
, no harm done what...
QUOTE(sniper69 @ Feb 10 2008, 03:47 PM)
Donkey Kong
@remysix, mfcm
i plugged in the Floppy Power, like i used to with SLI-DR, no harm done what...
@remysix, mfcm
i plugged in the Floppy Power, like i used to with SLI-DR
, no harm done what... Its highly recommended to plug in the Floppy power connector. It'll give the mobo additional stability when the GC draws some power from the mobo especially if ur GC is the high-end wan.
QUOTE(sniper69 @ Feb 10 2008, 03:47 PM)
Donkey Kong
@remysix, mfcm
i plugged in the Floppy Power, like i used to with SLI-DR, no harm done what...
@remysix, mfcm
i plugged in the Floppy Power, like i used to with SLI-DR
, no harm done what... for oc purpose, i'd plug in everything i could into the board...just to make sure that u have a nice and stable juice running throughout ur system...
anyway, about the vdroop issue...mine is really bad. but maybe u guys are luckier...just like mfcm said that his only a few mV which is acceptable...
btw, just realize that my Core1 (the second core) is kinda weak...just prime at 3.45G, others ok, but Core2 spitted out error as early as the 2nd minute...mmm...wonder why coz last time ok jek
my CPUz shows 1.424V on idle and 1.408V on load, i guess not that big as yours huh...
QUOTE(jy14 @ Feb 10 2008, 03:51 PM)
Its highly recommended to plug in the Floppy power connector. It'll give the mobo additional stability when the GC draws some power from the mobo especially if ur GC is the high-end wan.
good and stable running juice == good mobo stability == better for oc...so, for oc, i'd plug it in...
QUOTE
my CPUz shows 1.424V on idle and 1.408V on load, i guess not that big as yours huh...
not to say anything but i believe my rm300 ip35-e can perform better than this complicated board la. eh. Too many settings for this board... for "intelligent" users huh
QUOTE(a1098113 @ Feb 10 2008, 07:09 PM)
not to say anything but i believe my rm300 ip35-e can perform better than this complicated board la. eh. Too many settings for this board... for "intelligent" users huh
Aha, yeah, can your IP35-E do 550MHz of bus speed?Even with LN2 or DI the IP35-E won't be able to reach there.
DFI Lanparty DK P35 T2RS can.
That's the differences.
IP35-E is only built for mild overclocking.
DFI Lanparty boards is always built for crazy oc'ers.
Nothing is perfect in this world, so don't compare the vdroop thingie.
Plus, IP35-E has been launched for over a year now. Remind me again how old is DFI Lanparty DK P35 T2RS?
With IP35-E gone through a lot of bios update while DK P35 T2RS launched around 2-3 months ago, you'd expect the DK P35 to be better in everything?
Ever heard of Logical Thinking?
QUOTE(a1098113 @ Feb 10 2008, 07:09 PM)
not to say anything but i believe my rm300 ip35-e can perform better than this complicated board la. eh. Too many settings for this board... for "intelligent" users huh
When fully tweak,i don't think abit can keep up
But the bios have so many setting while Abit is just plug and play oc yet good result 
not to say anything, but this isn't DFI vs Abit thread, this is DFI LanParty DK P35 T2R-S thread... so, either it's about overclocking with this board or GTFO 
sorry for being harsh...
passed 32M SuperPI with lower VCore now...
read @CPUz:-
BIOS: 100.0mV
Idle: 1.408V
Load: 1.392V
SuperPI 32M
SuperPI 1M
Loading Time
bro prime it dy?stable?
QUOTE(sniper69 @ Feb 10 2008, 07:57 PM)
not to say anything, but this isn't DFI vs Abit thread, this is DFI LanParty DK P35 T2R-S thread... so, either it's about overclocking with this board or GTFO sorry for being harsh...
passed 32M SuperPI with lower VCore now...
read @CPUz:-
BIOS: 100.0mV
Idle: 1.408V
Load: 1.392V
SuperPI 32M
SuperPI 1M
Loading Time
ooo
somebody has had a bump on trd and ram strengths..
@sniper
no probs sniper69. no worries. nice words there from a polite man like you.
no probs sniper69. no worries. nice words there from a polite man like you.
-edited-
out of f good faith!
out of f good faith!
QUOTE(cstkl1 @ Feb 11 2008, 12:19 AM)
wei shawty..
i think u better actually get this board..
ure assuming a lot
the UT is awesome.. this board is more plug and play..
a bit better than gaygaybyte.. but hmm base on the digital pwm.. its more of a plug and play..
one pros only and sad.. nobody here even using it..
Err...i think u better actually get this board..
ure assuming a lot
the UT is awesome.. this board is more plug and play..
a bit better than gaygaybyte.. but hmm base on the digital pwm.. its more of a plug and play..
one pros only and sad.. nobody here even using it..
When did i assume something on the Lanparty?
I never did.
I'm just telling something to a 25 year old "kid" that comparing a 1 year old IP35-E with a newly launched DFI Lanparty DK P35 T2R is a stupid thing to do.
By the way, i don't think i want to get this board, for what lol?
I already have Abit IX38 Quad GT & DFI Lanparty LT X38 T2R.
QUOTE(sHawTY @ Feb 11 2008, 12:59 AM)
Err...
When did i assume something on the Lanparty?
I never did.
I'm just telling something to a 25 year old "kid" that comparing a 1 year old IP35-E with a newly launched DFI Lanparty DK P35 T2R is a stupid thing to do.
By the way, i don't think i want to get this board, for what lol?
I already have Abit IX38 Quad GT & DFI Lanparty LT X38 T2R.
When did i assume something on the Lanparty?
I never did.
I'm just telling something to a 25 year old "kid" that comparing a 1 year old IP35-E with a newly launched DFI Lanparty DK P35 T2R is a stupid thing to do.
By the way, i don't think i want to get this board, for what lol?
I already have Abit IX38 Quad GT & DFI Lanparty LT X38 T2R.
okay 2 silly boards but ..each to his own..
but anyway this is a DFI thread... so ure so far not helping bro..
guys .. for overclocking this board
shawty tell me .. y this board is better than mars??
because of??
since u have the LT X38.. and the bios is similar.. tell them in this thread..
its one reason heck thats even better than maximus/rampage/blitz all the asus boards..... if rampage had that option heck i would be the first one to buy that board when its officially released...it would make that board beyond awesome.
which is?
u guys should treasure this board for it.... its the highlight of the year man..
i played with the UT version of my friends board a few days ago and because of this one feature.. i put this board in the awesome category ( has anybody seen series chuck.. mr.awesome.??.kekeke)
i suppose this should be the pros of digital pwm.. to be able to do that..
seriously u owners of this board.. this feature is really awesome..
has anybody found a droop mod for this board??
cause i notice the droop was pretty bad..even with the loadline around 0.02-0.03v with a E8400.
i wonder if shawty can answer this.. since he has the LT X38 supposedly .. and hope he knows the x38 bios is based on the DK and not the UT... so he could actually comment here cause they would get similar results..
heck i hope the X48 board will have the UT bios.. screw asus man.. ( sorry my poor maximus but the digital pwm .. has shown its light.. the rest of the flaws can be overcomed.. but that one feature... damn)
aww shawty i dont mind being a kid and to learn, also be humble about it. And i only said its a complicated board, so many settings on it, so its only for intelligent users. It would be dumb for you to assume a kid like me would be comparing a cheapo ip35-e to a dfi since i have not used it. By the way, i am only basing it on what i am reading on this thread.
Oh yeah, kid also wants to know why you have such an issue with me saying it when u r not using it yourself? eh?
Oh yeah, kid also wants to know why you have such an issue with me saying it when u r not using it yourself? eh?
QUOTE(cstkl1 @ Feb 11 2008, 01:04 AM)
shawty tell me .. y this board is better than mars??
because of??
Sorry but i don't know that because i never use any of those board, to add, i never said that the DK P35 is better than the Foxconn Mars.because of??
What do you mean i'm not helping?
I'm just telling to not compare a 1 year old launched board with a 2-3 months old launched board.
Which part of that you don't understand?
Or do you want me to write it in japanese language?
Seriously, i don't understand what's your problem man, i didn't say anything that says the DK is weak.
You always wanted to argue about stupid things.
Sorry dude, you're making me the same as everyone else, we grow tired of you always wanted to argue about stupid things.
QUOTE(a1098113 @ Feb 11 2008, 01:06 AM)
aww shawty i dont mind being a kid and to learn, also be humble about it. And i only said its a complicated board, so many settings on it, so its only for intelligent users. It would be dumb for you to assume a kid like me would be comparing a cheapo ip35-e to a dfi since i have not used it. By the way, i am only basing it on what i am reading on this thread.
Oh yeah, kid also wants to know why you have such an issue with me saying it when u r not using it yourself? eh?
I did use IP35-E before i get my boards.Oh yeah, kid also wants to know why you have such an issue with me saying it when u r not using it yourself? eh?
I know the limitation of the IP35-E.
I used it before i advise you when you told me you want to buy a new PC.
You asked me which board, i told you to buy Abit IP35-E + E6750 based on the 400X8 settings remember?
I read the reviews on the DFI Lanparty DK P35 T2RS.
And it's proven that the DK P35 T2RS can do 515MHz, while the IP35-E can't even do 500MHz [Non Penryn / Wofldale]
No offence but seriously the IP35-E is way low compared to the DK P35.
That's my point and my only point.
Don't compare a 1 year old launched board with a 2~3 months old launched board. That's it, nothing more than that.
Is there anything in there that you don't understand?
Owh wait, you said you're not comparing?
Let me show you again what you've just said:
QUOTE(a1098113 @ Feb 10 2008, 07:09 PM)
not to say anything but i believe my rm300 ip35-e can perform better than this complicated board la.
» Click to show Spoiler - click again to hide... «
muahahaha
u already answered that question with the whole tirade....gee this 4ghz mystical e8400 virus effct is spreading.. mushrooms???
u dont know..and have no clue.. and i nver said u said this board is better
I SAY it IS BETTER... actually promoting sales here.. kekeke.. nice board ppl.. totally impressed..
oh yeah btw i speak japanese so yes u can..
jy14 whens the next shipment..
u have a moq right..
pm me bro if the x48 is coming.. interested in dfi.. i HOPE it has the same feature.. which it should
ps read the whole thread again.. ure the one arguing..thats i said u should know better.. argue with a fact .
i am trying to say u dont know this board.... like period.... cause u just argued about FSB.... also stop reading reviews.. try that mobo u supposedly have and argue back.. since its about the same as the DK p35..ish..
age or release dates means nothing...
again ppl this board is awesome...
QUOTE(cstkl1 @ Feb 11 2008, 01:53 AM)
muahahaha
u already answered that question with the whole tirade..
u dont know..and have no clue.. and i nver said u said this board is better
I SAY it IS BETTER... actually promoting sales here.. kekeke.. nice board ppl.. totally impressed..
oh yeah btw i speak japanese so yes u can..
ps read the whole thread again.. ure the one arguing..thats i said u should know better.. argue with a fact .
i am trying to say u dont know this board.... like period.... cause u just argued about FSB..
Owh god, do you understand english or not?u already answered that question with the whole tirade..
u dont know..and have no clue.. and i nver said u said this board is better
I SAY it IS BETTER... actually promoting sales here.. kekeke.. nice board ppl.. totally impressed..
oh yeah btw i speak japanese so yes u can..
ps read the whole thread again.. ure the one arguing..thats i said u should know better.. argue with a fact .
i am trying to say u dont know this board.... like period.... cause u just argued about FSB..
I did not argue about FSB.
I'm just telling that kid to not compare a 1 year old board with a 2~3 months old board on vdroop. Which part of that you don't understand?
How many times do i have to repeat that?
By the way, age or release dates do mean something.
When IP35-E has been launched for more than a year, where Abit engineers has engineered some bios updates which solves a lot of bugs that is in the Abit IP35-E, while the DK P35 is still new, Bios updates for that DK P35 is still a little in numbers.
Abit IP35-E Bios Update Website:
http://www.abit.com.tw/page/en/download/do...KET_TYPE=LGA775
DFI Lanparty DK P35 T2R Bios Update Website:
http://us.dfi.com.tw/Support/Download/bios..._FLAG=A&SITE=US
That's my point.
Got it?
This will be my last reply to your post.
Tired of entertaining morons like you.
let just cut the crap off.
anymore OC results from the DK P35 users??
* i was thinking to let go my fullset of mobo/q6600/ram and go for X38 soon.
any taker for all that stuff?
rgds
anymore OC results from the DK P35 users??
* i was thinking to let go my fullset of mobo/q6600/ram and go for X38 soon.
any taker for all that stuff?
rgds
» Click to show Spoiler - click again to hide... «
sishh nothing to do with this freaking thread..
» Click to show Spoiler - click again to hide... «
okay let get this straight when u go full digital pwm on mobo like abit and dfi..
even though they reduce flux for some reason theres a lot of droop and also wrong voltage readings like quite big compared to analogs..
but putting that aside.. which u can just go ahead and say i dont care ( personally i say too unless u want to break WR).. stability is more important.. and with the flexibility of the digital pwm and good software to bios feedback which dfi has.. its just amazing wha the engineers did with this board..
so thats that for both of u... who both is just keep talking about i have this board and u have that board and
dfi engineers were dumb .. sish.
etc example of cons of digital pwm.. early adopters of the abit quadgt x38 like bstdude can tell u about what happen to his proc/rams and graphic card..burn baby burn
Added on February 11, 2008, 2:31 am
QUOTE(overclockalbert @ Feb 11 2008, 02:22 AM)
let just cut the crap off.
anymore OC results from the DK P35 users??
* i was thinking to let go my fullset of mobo/q6600/ram and go for X38 soon.
any taker for all that stuff?
rgds
anymore OC results from the DK P35 users??
* i was thinking to let go my fullset of mobo/q6600/ram and go for X38 soon.
any taker for all that stuff?
rgds
nah bro wait..
the x38 bios is more like the DK
so the x48 should be more like the UT i hope..which is gonna be a big plus for ure quadies
so might as well get the king which i suspect is gonna be awesome
the DK and UT especially caught my attention
sorry DFI users.. gonna be joining u guys soon.. but when idiot who dont have the mobo and talk crap with i feel this and that comes here.. should be shot down like a dog..
especially about a great board he has no clue about.
number of updates bios doesnt mean to determine a good or bad bios
@cstkl1
mind to tell wat is the feature u r talking about?
@cstkl1
mind to tell wat is the feature u r talking about?
--edited again--
no idea why i am doing this again. dk users have fun
no idea why i am doing this again. dk users have fun
QUOTE(coolice @ Feb 11 2008, 02:31 AM)
number of updates bios doesnt mean to determine a good or bad bios
@cstkl1
mind to tell wat is the feature u r talking about?
@cstkl1
mind to tell wat is the feature u r talking about?
spotted.. somebody is gonna go dfi also.. kekeke
QUOTE(sHawTY @ Feb 11 2008, 02:10 AM)
By the way, age or release dates do mean something.
When IP35-E has been launched for more than a year, where Abit engineers has engineered some bios updates which solves a lot of bugs that is in the Abit IP35-E, while the DK P35 is still new, Bios updates for that DK P35 is still a little in numbers.
When IP35-E has been launched for more than a year, where Abit engineers has engineered some bios updates which solves a lot of bugs that is in the Abit IP35-E, while the DK P35 is still new, Bios updates for that DK P35 is still a little in numbers.
this is so not true
for ur info, BIOS wont fix those vdroop thinggy
if the BIOS able, Y those extreme pc enthusiast bother doing mod to minimoze vdroop
QUOTE(gengstapo @ Feb 11 2008, 12:16 PM)
this is so not true
for ur info, BIOS wont fix those vdroop thinggy
if the BIOS able, Y those extreme pc enthusiast bother doing mod to minimoze vdroop
for ur info, BIOS wont fix those vdroop thinggy
if the BIOS able, Y those extreme pc enthusiast bother doing mod to minimoze vdroop
yup unless u have loadline like UT.
noticed something today.. is it what i think it is??
[attachmentid=396292]
its not any of my voltages.. so is it 0/3 and 1/3 gtl voltages?? dfi owners can confirm this with ure board?? since u can set ures..
aka 111 in ure setting means 1.11v
^its should be software bug etc.. from what ive seen, how come almost 80% of ur voltage reading very low compare to default value?? unless u using super cheap "matahari" psu
ps: may i know what fan u using there.. the speed kinda superb(35526rpm)..
ps: may i know what fan u using there.. the speed kinda superb(35526rpm)..
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.