Help - Search - Member List - Calendar
Full Version: The ZERO DAC + Headamp (NO 56K)
Lowyat.NET > Special Interest > Audiophiles
Pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
GodLuvSxS
Guys, I have found some source for opa627, USD11 ~ 16/piece for new one (shipping not included), some used one for serious value of just around RM20/piece, interested? brows.gif
Kyl3
Interested on it but I have no idea on how to swap them sad.gif
kwekeugene
QUOTE(GodLuvSxS @ Jan 30 2008, 09:26 PM)
Guys, I have found some source for opa627, USD11 ~ 16/piece for new one (shipping not included), some used one for serious value of just around RM20/piece, interested? brows.gif
*



So for the Zero I would need 2 OPA627 and a Browndog adapter right?

Do you think can get the OPA627 already soldered on the browndog adapter, I lack the tools and probably the skill to assemble it myself sad.gif
GodLuvSxS
QUOTE(Kyl3 @ Jan 30 2008, 10:01 PM)
Interested on it but I have no idea on how to swap them sad.gif
*




QUOTE(kwekeugene @ Jan 30 2008, 10:08 PM)
So for the Zero I would need 2 OPA627 and a Browndog adapter right?

Do you think can get the OPA627 already soldered on the browndog adapter, I lack the tools and probably the skill to assemble it myself sad.gif
*



To swap opa627 into ZERO, you guys need 2 opa627 and soldered on browndog adapter, I found some soldered 627 on browndog, will research more before update you guys with the price smile.gif
LittleGhost
OPA627BP? or AP?
ccschua
Test Seven: Burr Brown OPA 627 BP on Browndog adaptor Price: £28 each (Total £56 for 2 singles) Browndog adaptor £5 Total: £61

Two words sum this chip up........ "absolute class" This is the only single chip in the test (the rest all being duals) and it was necessary to fit two single channel 627's onto a single to dual Browndog adaptor which Adapts two single-channel DIP-8 op-amps to a dual DIP-8 pinout. These 2 single channel op amps absolutely trounced anything that had gone before them in this test..... the width of the soundstage, the clarity and the sheer presence make this my choice of op amp for use in the Chiarra without a shadow of a doubt. The sound is just so "clean", so "natural", so "musical" and so "detailed" with the 627's on board. I said the AD 823 was "as close to headphone heaven I have yet been" The Burr Brown 627 "is" headphone heaven....... absolute class act. 10 / 10



wow look at this review, it is BP. must do the browndog lah. his price too high, who can get cheper..
GodLuvSxS
QUOTE(LittleGhost @ Jan 30 2008, 11:54 PM)
OPA627BP? or AP?
*



USD11 for BP & USD16 for AP smile.gif

QUOTE(ccschua @ Jan 31 2008, 12:16 AM)
Test Seven:  Burr Brown OPA 627 BP on Browndog adaptor  Price: £28 each (Total £56 for 2 singles) Browndog adaptor £5    Total: £61

Two words sum this chip up........ "absolute class" This is the only single chip in the test (the rest all being duals) and it was necessary to fit two single channel 627's onto a single to dual Browndog adaptor which Adapts two single-channel DIP-8 op-amps to a dual DIP-8 pinout.  These 2 single channel op amps absolutely trounced anything that had gone before them in this test..... the width of the soundstage, the clarity and the sheer presence make this my choice of op amp for use in the Chiarra without a shadow of a doubt. The sound is just so "clean", so "natural", so "musical" and so "detailed" with the 627's on board. I said the AD 823 was "as close to headphone heaven I have yet been" The Burr Brown 627 "is" headphone heaven....... absolute class act. 10 / 10
wow look at this review, it is BP. must do the browndog lah. his price too high, who can get cheper..
*



user posted image

Is this the browndog adapter you guys mentioning about? Normally how much does this thing cost? I need some reference to nego with the seller if that thing is browndog adapter smile.gif Seriously if those who are really serious about getting the best out of ZERO dac, should consider swap in OPA627 for the DAC section, 2 x OPA627 BP = USD22 plus another small fees for browndog adapter and perhaps some fees for DIY sifu to help u guys solder in, i think the cost should be just around RM100 and you get one of the best sound biggrin.gif
mikelanding
Woot..seem like many people kena OPA627 poison...lol...
I can get OPA627AP at USD14 (including shipping to your doorstep) from oversea. But need to order mininum 4 pcs per batch (same shipping address).
It used to be USD12....but price increase out of suddent cry.gif cry.gif ....haiz..
But the browndog adapter (socket type) i cant find it cheap beside those at ebay and some online shop...ZZZz
scy320
QUOTE(mikelanding @ Jan 31 2008, 11:54 AM)
Woot..seem like many people kena OPA627 poison...lol...
I can get OPA627AP at USD14 (including shipping to your doorstep) from oversea. But need to order mininum 4 pcs per batch (same shipping address).
It used to be USD12....but price increase out of suddent  cry.gif  cry.gif ....haiz..
But the browndog adapter (socket type) i cant find it cheap beside those at ebay and some online shop...ZZZz
*



hehe,this forum is famous for poison.bro,wan to ask what is the different between OPA627AP and and BP
GodLuvSxS
QUOTE(GodLuvSxS @ Jan 31 2008, 12:44 AM)
USD11 for BP & USD16 for AP smile.gif
user posted image

Is this the browndog adapter you guys mentioning about? Normally how much does this thing cost? I need some reference to nego with the seller if that thing is browndog adapter smile.gif Seriously if those who are really serious about getting the best out of ZERO dac, should consider swap in OPA627 for the DAC section, 2 x OPA627 BP = USD22 plus another small fees for browndog adapter and perhaps some fees for DIY sifu to help u guys solder in, i  think the cost should be just around RM100 and you get one of the best sound biggrin.gif
*



LOL still no ppl confirm with me that the thingie inside the picture is browndog adapter?
mikelanding
yes..it is a browndog adapter..But need to take note izzit socket or solder on...
For opamp rolling, end user will prefer socket type...smile.gif
GodLuvSxS
QUOTE(mikelanding @ Feb 1 2008, 12:48 AM)
yes..it is a browndog adapter..But need to take note izzit socket or solder on...
For opamp rolling, end user will prefer socket type...smile.gif
*



That one is DIP brows.gif Mike, how much you spent on this? Seriously i think i got a nice price biggrin.gif
mikelanding
i still cant find cheap browndog adapter... sad.gif
only can find reasonable price OPA627AP
mADmAN
guys...so sorry...me in the middle of moving office right now....so alot of things to do. need to setup cubicles, desks etc etc. so busy..now oso just only got home.

ive also confirmed a Maya44 with akabane. so hopefully he reads the PM i just sent him and mebbe can get the Maya44 tomorrow (friday) or saturday. then i can use the digital output on the card instead of the crappy mobo im using now.

as for ZERO vs HD2...dunno...never heard the HD2 before.

but... ZERO vs Fubar II+Cute Battery II amp... that one i know.

to simply put. the ZERO at almost 1/3 the price of the Fubar II+Cute Battery II, can seriously compete with them. there are some aspects where the ZERO is better...and there are some aspects where the Fubar is better. but the price point of the ZERO is a HUGE advantage imho.

@empire23
bro. any chance ur dropping by Mid Valley? can pass u the unit. too busy to come out and play right now due to moving office. if can, gimme a buzz @ 0126596370.
teNtiOn
Is this the browndog adapter you guys talking about? Changing single op to dual op. I can get 5 for around RM10 if you guys want. There also the adapter to change SOIC to DIP.

user posted image
mikelanding
QUOTE(teNtiOn @ Feb 1 2008, 02:43 PM)
Is this the browndog adapter you guys talking about? Changing single op to dual op. I can get 5 for around RM10 if you guys want. There also the adapter to change SOIC to DIP.

user posted image
*


wow..that is cheap..but is only the pcb board rite?
Browndog adapter that i lookin for is like below:
user posted image

A complete with socket (DIP)
Can u find it? and how much?
teNtiOn
Yup, that's only for the pcb board. The dip cost around RM1 for 1 unit and the pin around RM3 for 40 together. It's a little bit cheaper but lazy to do the conversion. It's selling separately so need to do some solder job. So should be around RM20 to get 5 set.

user posted image
user posted image
mikelanding
QUOTE(teNtiOn @ Feb 1 2008, 03:42 PM)
Yup, that's only for the pcb board. The dip cost around RM1 for 1 unit and the pin around RM3 for 40 together. It's a little bit cheaper but lazy to do the conversion. It's selling separately so need to do some solder job. So should be around RM20 to get 5 set.

user posted image
user posted image
*


wow...that is not bad for a adapter..
Come come every1..let do a bulk oder to teNtiOn...I want 2 units!!
ccschua
i prefer to have the complete unit. i leceh to do the soldering, my skill also no good. is it necessary to be silvered ?
nicholas_1213
QUOTE(mikelanding @ Feb 1 2008, 06:08 PM)
wow...that is not bad for a adapter..
Come come every1..let do a bulk oder to teNtiOn...I want 2 units!!
*



If really available i want 2 units too thumbup.gif (not sure where to use but keep it for future use tongue.gif DAH1's opamp is soldered so cant do anything about it sad.gif )
mikelanding
QUOTE(nicholas_1213 @ Feb 1 2008, 09:19 PM)
If really available i want 2 units too  thumbup.gif (not sure where to use but keep it for future use tongue.gif DAH1's opamp is soldered so cant do anything about it sad.gif )
*


U can un solder the existing opamp and replace with a DIP adapter...tongue.gif
Is a real sad case for DAH1 to solder the opamp!!
nicholas_1213
QUOTE(mikelanding @ Feb 1 2008, 09:57 PM)
U can un solder the existing opamp and replace with a DIP adapter...tongue.gif
Is a real sad case for DAH1 to solder the opamp!!
*



Hehe, but technically it'll void the warranty isn't it sad.gif Nvm i'll do it after 1 year haha.
And to be frank i'm quite new to this opamp thingy, so gotta read and learn more too..
teNtiOn
QUOTE(mikelanding @ Feb 1 2008, 06:08 PM)
wow...that is not bad for a adapter..
Come come every1..let do a bulk oder to teNtiOn...I want 2 units!!
*


I can order for you if 5 set needed so didnt waste the extra pcb or pin. I'm actually ordering something for myself so tumpang me. It should take around 2 weeks to arrive based on my last experience. Anyway let me know latest on sunday cause i will mostly made my order on sunday so that it can send out on monday as requested by the shop.
ccschua
Tention,


i also net 1 set for my ZERO. Is it 1 set = 2 unit and it it come completely aseembled ??
mikelanding
QUOTE(ccschua @ Feb 2 2008, 11:06 AM)
Tention,
i also net 1 set for my ZERO. Is it 1 set = 2 unit and it it come completely aseembled ??
*


I have a brief discussion with teNtiOn. We will do a non-profit bulk for this browndog adapter. I will bulk 10 units for 1 time only. teNtiOn is so kind enough to help me make it into final product (No DIY, Plug and play tongue.gif). thumbup.gif thumbup.gif
The total cost for 10 unit will be: RM40 (parts) + RM15(Oversea Shipping) + RM5(Poslaju to me) = RM60
So 1 Unit will be RM6 +Postage fee to your door step. I dun offer any COD unless U can come to MMU Melaka. smile.gif

U guys need to be fast. Coz 1 unit of browndog adapter is selling like USD5 (excluding shipping fee) at Ebay!!!

Once again, this is a NON-Profit bulk brought by a music lover to another...

I dun want to take any deposit, but I will definately curse those who FFK after U confirm yr order!!!
PST me if U interested.

**Once again, credit to teNtiOn because he will spend his effort to make it into final product with NO CHARGE** notworthy.gif notworthy.gif notworthy.gif

Buyer list for Browndow Adapter (10 units only):
1. mikelanding - 3 units
2. nicholas_1213 - 3 units (+2 OPA627AP) [Paid]
3. Kyl3 - 1 unit (+2 OPA627AP) [Paid]
4. kwekeugene - 1 unit (+2 OPA627AP) [Paid]
5. ccschua - 1 unit (+2 OPA627AP) [Paid]
6. stormspider - 1 unit (+2 OPA627AP) [Paid]
Left 0 units..pls dun feel sorry!!


Those who interest in OPA627AP. The price is USD14 per unit(ship to your door step). Min order is 4 units,which mean min 4 units will ship to 1 address. U guys can sort out yourself to divide among them. If kena tax, U have to bear it (but I doubt U will kena). I still taking order for Opamp627AP.

Added:
1) Important note: Due to CNY, the adapter only will be ready 2-3 weeks at best...Please dun rush me or teNtiOn brother...We do it for goold will and U dun pay anything up front..Pls understand..smile.gif
2) For those who order 1 X Adapter + 2 X OPA627AP, pls bank in USD28X3.25 + RM6 (Poslaju Fee) = RM103 (corrected..sorry) latest by (04/Feb/2008 Monday). If U want to sent together with Adapter pls add RM6 for it..pm me for bank detail
3) Bank in Detail. Pls PM me or Screen shot it once U have bank into me. TQ
» Click to show Spoiler - click again to hide... «

4) Sorry, It shoud be RM103 instead of early RM97.. Really Sorry about it notworthy.gif notworthy.gif
5) On 04/Feb/08: All had paid up...Thank for the fast payment!! Will make order by 11.30pm tonite
utellme
I'm not DIY guy, else I also get 1 set from u. how about the op627 any bulk?
nicholas_1213
Yo mikelanding bro, already PM you.. and a BIG BIG THANK to bro teNtiOn for helping us (even help us to make into final product) notworthy.gif notworthy.gif notworthy.gif
Kyl3
so we can straight get the browndog adapter den plug in 2 opa627 den we are ready to rock?

nicholas_1213
QUOTE(Kyl3 @ Feb 2 2008, 12:45 PM)
so we can straight get the browndog adapter den plug in 2 opa627 den we are ready to rock?
*



Yeah u r right, no DIY required rclxm9.gif Good for a DIY noob like me blush.gif
Kyl3
so, anyone wanna grab 2?
i thk i'll grab 2 for the dac.
ccschua
so in total we need

1 x browndog adaptor
2 x OPA627

total = 1x RM 6 + 2 x USD 14 without postage. Am I correct ?
mikelanding
QUOTE(ccschua @ Feb 2 2008, 03:14 PM)
so in total we need

1 x browndog adaptor
2 x OPA627

total =  1x RM 6 + 2 x USD 14 without postage. Am I correct ?
*


ya correct...already got 2 forumers ordered 2X OPA627AP each. U can join this batch which will sent to my address...smile.gif

Pls PM me on anything about the OPA627..
yeahs4.1
i'm considering of letting go my OPA637. anybody interested?
kwekeugene
Mike,

Please remember to put my name up for 1 unit of Browndog smile.gif
ccschua
Please put my name for 1 unit browndog and 2xopa627
GodLuvSxS
LOL dual opa627 assembled on browndog for less than RM100 is tempting, i might consider to get one unit for my self LOL Mike, I will let you know my decision by 2moro tongue.gif poison poison
LittleGhost
QUOTE(yeahs4.1 @ Feb 2 2008, 04:19 PM)
i'm considering of letting go my OPA637. anybody interested?
*



how muchy ?
utellme
look like everyone interested in op627 upgrade, very confuse now doh.gif , I think i just wait for my zero arrive 1st, maybe I like the sound leh..
scy320
QUOTE(yeahs4.1 @ Feb 2 2008, 04:19 PM)
i'm considering of letting go my OPA637. anybody interested?
*



bro,best price please.
mikelanding
QUOTE(LittleGhost @ Feb 2 2008, 06:55 PM)
how muchy ?
*




QUOTE(scy320 @ Feb 3 2008, 02:09 AM)
bro,best price please.
*


I can get some OPA637BP @USD15...let me know if U interested...
ccschua
Mike,

pls pm bank account details and instruction for us to bank in before 4/2
mikelanding
QUOTE(ccschua @ Feb 3 2008, 11:53 AM)
Mike,

pls pm bank account details and instruction for us to bank in before 4/2
*


I have PM U
Also I added my bank in detail on the post as well...smile.gif
Andiboi
am i too late anyway?
can i still proceed my order?..
1 X Adapter + 2 X OPA627AP
mikelanding
All had paid up!!..Nice nice rclxms.gif rclxms.gif

Buyer list for Browndow Adapter (10 units only):
1. mikelanding - 3 units
2. nicholas_1213 - 3 units (+2 OPA627AP) [Paid]
3. Kyl3 - 1 unit (+2 OPA627AP) [Paid]
4. kwekeugene - 1 unit (+2 OPA627AP) [Paid]
5. ccschua - 1 unit (+2 OPA627AP) [Paid]
6. stormspider - 1 unit (+2 OPA627AP) [Paid]

Left 0 units..pls dun feel sorry!!

For those who want OPA627AP (USD14 per pcs) or OPA637BP (USD15) excluding poslaju to your doorstep, still can order coz I will final confirm with my oversea friend around 11.pm tonite. HUrry or be sorry later..tongue.gif
GodLuvSxS
QUOTE(mikelanding @ Feb 4 2008, 02:11 PM)
All had paid up!!..Nice nice rclxms.gif  rclxms.gif

Buyer list for Browndow Adapter (10 units only):
1. mikelanding - 3 units
2. nicholas_1213  - 3 units (+2 OPA627AP) [Paid]
3. Kyl3 - 1 unit (+2 OPA627AP) [Paid]
4. kwekeugene - 1 unit (+2 OPA627AP) [Paid]
5. ccschua - 1 unit (+2 OPA627AP) [Paid]
6. stormspider - 1 unit (+2 OPA627AP) [Paid]

Left 0 units..pls dun feel sorry!!

For those who want OPA627AP (USD14 per pcs) or OPA637BP (USD15) excluding poslaju to your doorstep, still can order coz I will final confirm with my oversea friend around 11.pm tonite. HUrry or be sorry later..tongue.gif
*



Wow so many ppl getting the opa627, hype of the month tongue.gif
ccschua
Seriously I have not listened to head phone for a long long time. I knew the hype is there. Can someone explain how is that Senheiser HD 550 compared to listening Stereo bookshelf speaker such as B&W.

rgds.
GodLuvSxS
user posted image

Guess what arrived today! LME49720, all eight pieces inside the tube biggrin.gif
dark_evilz
is this dac can be plug to other source, say mp3 player or dvd player...
if can, how?? coz i juz saw only spdif input at the dac..
GodLuvSxS
QUOTE(dark_evilz @ Feb 7 2008, 09:18 PM)
is this dac can be plug to other source, say mp3 player or dvd player...
if can, how?? coz i juz saw only spdif input at the dac..
*



Normally DAC just accept signal then connect to the amplifier, the DAC only got RCA out, if your mp3 player or DVD player accepts RCA in, then you need a RCA to RCA cable. If accept mini stereo, then you need RCA to mini cable smile.gif
dark_evilz
hhmm... let say my mp3 player only have mini phone jack. Mean i need the mini to RCA cable, plug the mini to the mp3 player and plug the rca to the DAC. where?coaxial in?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
All Rights Reserved 2003-2006 Vijandren Ramadass
Invision Power Board © 2001-2009 Invision Power Services, Inc.