Hii all.i faced a prob about using N73 as a modem to connect to Celcom Broadband,but there is some error message "one touch access failed to established a netwrok connections,please check the connections seting,",then i changed d card into K800i,the connections success,any body know whats wrong with my N73 config?? really stuck here,for info i'm using Win XP SP2,tested it with Vista oso got same result.

Hi i'm new here but i can help you with this problem

Normally for this error prompt it was due to APN Control was enable in your phone. Follow the steps below
Nokia
Step 1: Select MENU
Step 2: Select Tools
Step 3: Select Settings
Step 4: Select Connection
Step 5: Select APN Control
Step 6: Select Options
Step 7: Select Deactivate restrictions

Hope it helps

is there possible to get setting for china tv phone?

---

Added on July 16, 2008, 7:39 amis there possible to get setting for china tv phone?

you can look at the #1. try to use i-mobile setting. mostly works for me

i have a problem, can some one help?

Problem : Cannot add new setting account for mms/wap/gprs - account full - 70 something bblabla bla..

phone : nokia 6300
type : Digi Postpaid.

how?

Well maybe u can go to settings there look for access point delete everything inside it and re send those settings again la.hope this works for u..

i'll try

update :

i've delete all access point, then re-send setting from digi this message was pop up

only 70 sets allowed.
setting discarded..

how??

try format ur phone. press *#7370#. but you need to backup all you data first.

did that but nothings happen, yesterday bring that phone to my fren shop, he said the firmware/system files corrupted and need to reflash @ update to latest version v6.01.

me 2 having the same prob.. using hotlink..

hello there...
i want to ask simple question...
can i surf internet when my credit is expired?
because when i use shortcut key to internet (on my phone), i can go online at several pages/links there (of course there are links that cannot being accessed, it said out of prepaid credit)...
do my credit will be deducted when i recharge my credit?
or is it several links are allowed to surf for free?

thanks for your help..

Some page is free and some are not. You can't access a page that requires credit if you dont have any. Thus answer to your question is: your credit will not be deducted when you recharge later since it does not allow you in the first place

---

Added on August 12, 2008, 11:07 am

Hi,
I dont really know the phone but these are the standardize/generic parameters that u must key in to use Maxis network if your phone does not available in the Maxis website.
WAP
Connection Name: Maxis 3G WAP
Data bearer: Packet data
Access point name: unet
User name: maxis
Password: wap
Domain: [leave it blank]
Homepage: http://wap.maxis.com.my
Connection type: http
Proxy server: 202.75.133.49
Port: 80

MMS
Connection Name: Maxis 3G MMS
Data bearer: Packet data
Access point name: unet
User name: maxis
Password: wap
Domain: [leave it blank]
Homepage: http://172.16.74.100:10021/mmsc
Connection type: http
Proxy server: 202.75.133.49
Port: 80

all you need to do is find the menu in which you can enter all the parameters above
Good luck!!!

hi guys, i've activated my wap and gprs long long time ago. while using er nokia 3650 ...

now im using se k850i and wanna use the trackid feature but always cant. also i cant surf the net. keep tell me to check my internet setting or contact operator.

i get settings from digi cs, SE site, Digi web based, Digi sms all no avail.

any chance to be able to set manually ?

thx.

hi. i can send mms and surf internet using my nokia 6120.

but i cannot send email. how to do the email setting?

i'm using celcom 3g.

Setup Configuration Of 3G, GPRS, EDGE, MMS For Maxis, Celcom & DiGi

Final Updates - February 2008



This could help you to configure your mobile phone (sony ericsson, nokia, siemens etc). This guide is example and you must do the option yourself. Note that IPv4 (may) doesn't exist in SE or siemens. Certain mobile doesn't support OTA. So, I sent a manual configuration. Sorry, no 3G setup for Celcom except you use Nokia, you can get it at a website below. For OTA:


Nokia (all): https://nokiags.wdsglobal.com/standard?siteLanguageId=118
Maxis (all): http://www.maxis.com.my/3G/about3G.asp
Digi (MMS, GPRS & EDGE): http://www.digi.com.my/data_services/gprs/...fig.do?page=web
Celcom (MMS & GPRS): http://www.celcom.com.my/cep/productservic...RSMMS/main.html


Maxis

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration

Manual WAP Settings
• On Desk, tab Control Panel -> Internet setup. (or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Maxis GPRS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap
• Tab Next then tab Finish and OK to complete the setup.
• Homepage: http://wap.maxis.com.my/wml/index.wml
• Session Mode: Permanent
• IP adress: 202.075.133.049
• Login Type: Automatic,
• Authentication Type: Normal



MMS Settings

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message…(or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Maxis MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 202.75.133.49
Port number: 80
• Tab OK then Finish
• Under Homepage, key in http://172.16.74.100:10021/mmsc and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

---

Added on August 16, 2008, 11:08 amDiGi

OTA at http://www.digi.com.my/data_services/gprs/...fig.do?page=web

Manual WAP Settings
• On Desk, tab Control Panel -> Internet setup. (or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: DiGi GPRS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digiwap
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: digi
Password: digi
• Tab Next then tab Finish and OK to complete the setup.



MMS Settings

OTA at http://www.digi.com.my/data_services/gprs/...fig.do?page=web

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message… (or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: DiGi MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digimms
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: mms
Password: mms
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 203.92.128.160
Port number: 80
• Tab OK then Finish
• Under Homepage, key in http://mms.digi.com.my/servlets/mms and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

---

Added on August 16, 2008, 11:08 amCelcom

Celcom (MMS & GPRS): http://www.celcom.com.my/cep/productservic...RSMMS/main.html

Go to Write Message.
• Type gprspre (for prepaid) send to 95000 or b Type gprspost (for postpaid) send to 95000
• You will receive the settings & save / install all settings.
• You will be charge SMS send RM0.15 and SMS received RM0.40

Or refer to manual at http://www.channelx.com.my/mdp/gprs/wap_config.jsp and http://www.celcom.com.my/cep/productservic...RSMMS/main.html

• Manual WAP GPRS Settings
• On Desk, tab Control Panel -> Internet setup.(or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Celcom GPRS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: celcom.net.my (Postpaid)
Access point: celcom (Prepaid)
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank)
• Tab Next then tab Finish and OK to complete the setup.



MMS Settings

Or refer to manual at http://www.channelx.com.my/mdp/gprs/wap_config.jsp and http://www.celcom.com.my/cep/productservic...RSMMS/main.html

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message…(or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Celcom MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: mms.celcom.net.my (Postpaid)
Access point: celcom (Prepaid)
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank)
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 10.128.1.242
Port number: 8080
• Tab OK then Finish
• Under Homepage, key in http://mms.celcom.net.my and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.


For celcom user, dial 1111 for 3G. If you use Nokia, get the 3G setup at: https://nokiags.wdsglobal.com/standard?siteLanguageId=118

---

Added on August 16, 2008, 11:09 amDowload the offline version here: http://www.xtremevault.com/48523244-3G__GP...lcom___DiGi.pdf

Please note that the blue color addition is for 3G Settings

Thnx bro

wanna ask

wat if my phone is not listed in the CHOOSE YOUR PHONE MODEL

im using nokia 5220 xpress music
but i chose 5310 express music

then i save the configuration and can surf the internet

will it spoil my phone? for choosing wrong model?

Nope

oh okay thanks

but if it wont affect anything

y they want us to choose phone model ? jus curious

answer to ur question:
1. the setting sent over the air to your phone need to identify the right model since different model behave differently.
2. Some setting can be used on closer model (like in ur case), however 'closer' model is a vague definition because only tech savvy / skilled user can tell which model is close to which.

Thnx allytom

No problem

i'm just too free with my time

why i can't receive mms when there is no 3g coverage?

MMS delivery doesn't depend on 3G coverage. However it can be slower sometimes because of the data transactions needed to be donwloaded to your phone.

You can do a simple test by sending an empty MMS (blank, no pics) to yourself on any area (2G or 3G coverage).
If you received it --> You're fine
if you do not receive it --> check the settings on your phone and your data activation (GPRS/3G)

Hope it helps

ello.
can help me.
using w850i..
use celcom prepaid..
how to configure the gprsnmms?

try this, celcom dun list w850 on their list, clearly means that they dun update their list?
so try using settings which might be similar
http://www.channelx.com.my/mdp/gprs/wap_co...el_name=se_w610

thanx ndragon...
now i can use gprs n mms..
can i ask more.
how to use 3G.
but my simcard not 3G.
must change sim num?

need change sim card to use 3g

I nearly vomited to get my DiGi MMS settings activated on my Samsung X700.
Tried n times already, saved and rewrote the profile. Still can't use, neither send or receive.

Previously was using my DiGi on a Nokia phone and it worked, but now it can't work anymore.

Luckily I have my Hotlink on SE P1i as backup. Have to use Hotlink to send MMS.

thanks for thread owner..its helpful

i configure everything d but y whn i press d browser button it says network nt available?

sometimes is phone version problem.

den wat shud i do?

which telco are u using?

try to go to the phone shop you buy the phone and tell them your problem. they should do it free for you

YES ME TOO .. I TRY GPRS SETTTING ON NOKIA 6600
VERY SUCK,STILL CANNOT GET AT CYBRJAYA HERE..
CALLED OPERATOR VERY STUPID..

SIFU HERE ,PLEASE HELP ME , THANKS ALOT..

i tried downloading the Maxis WAP settings on my W200i and it didn't work...then i downloaded the 3G WAP settings..strangely it worked..lol..try downloading the 3G WAP/MMS settings instead

its because of you already press *136# and not *133#

---

Added on September 15, 2008, 5:14 pm
try manual configuration. i have already updated on #1. credit by sakuraguy and allytom


try manual configuration. i have already updated on #1 credit by sakuraguy and allytom

[quote=jack7155,Sep 15 2008, 05:13 PM]
its because of you already press *136# and not *133#

i pressed both

[quote=FamousLastWords,Sep 15 2008, 06:45 PM]
[quote=jack7155,Sep 15 2008, 05:13 PM]
its because of you already press *136# and not *133#

i pressed both

[/quote]
tats why lar.....

guys im using eten m800 and needs digi's settings for mms

since digi website dont have m800 i use eten x800 since difference is just no qwerty hardware keyboard

but problem is at mms settings-> gateway

they ask me to choose TCPIP but i only have NONE, WAP 1.0 Gateway and WAP 2.0 Gateway as choices..tried them and dont work.. how ?

Got a problem here. I downloaded the settings from *100#, MAxis MMS 2.0 and Maxis WAP 2.0. Is there a setting with MMS&GPRS in one ? It's very troublesome that everytime I wanna access the GPRS, i need to switch profile to Maxis WAP 2.0 .

you can get the bundle settings on maxis.com.my--> get your phone settings here!-->Get Phone Settings

actually you dont have to switch profile when you have both and want to use either MMS or GPRS (WAP). When you received the settings from *100#, the phone will prompt you whether to set it as default or not (most phones). If you select yes then it should take care of it.

each phones has its own profile for browser settings (profile) and MMS.

Maxis user can have all the setting easily, Just dial *100#, Phone setting, and choose...

oh for settings or can go to www.maxis.com.my to get it over the air and sms will come save it down with 0123 password.

I'm having problem with the hotlink gprs & mms settings.
when i sms for the wap settings, i got a msg saying 'update is required.'
what's does that mean?

Oh..wat phone u using?when u get the sms ah?usually this sms come out for update for sony ericsson phones lo..than the msg prompt out got any option ma to choose ma?

hi
i'm using Motorola L6.
i got the sms when i request for gprs wap settings for my phone.
option available is 'install', but after i click 'install', it says 'enter authentication', i don't know what to key in then

Oh oh simple its 0123 lo haha but for motorola need to do manually eithr for mms or wap already don really remeber..but if u wan the manual strp by step settings let me know i give to u..but try the sms settings 1st..