GPU-Z is a lightweight utility designed to give you all information about your video card and GPU.

GPU-Z 0.2.5

* Fixed BIOS Reading on HD 4870. Please do not flash non-128K BIOSes to GDDR5 cards
* Fixed GDDR5 bandwidth calculation
* Fixed texture fillrate on RV770 and RV730
* Added three extra on-die temperature sensors to RV770 monitoring
* Removed states.dmp file creation
* Fixed GPU activity readings on RV770
* Changed devices list order to be more intuitive (by bus number now)
* Added Shared Memory support, see the forum for more info
* Fixed more 190°C PCB readings on NVIDIA
* Catalyst Beta versions no longer displayed as version 2.2
* Fixed sensor graph overflow
* Sensor graphs will try to autoscale now
* Fixed RV505 process size
* Fixed memory bus width reading on some ATI RS300
* Fixed rare crash when reading NVIDIA sensors
* Fixed GDDR3 detection for G71

Homepage

Download | Download Page

Thanks for sharing .. Using it now

Thanks for sharing.

This is good, thanks for sharing this one...

I've used CPU-Z, now GPU-Z... wooo...

thanks for the link sifu

thank you......

GPU-Z.0.1.3 was released.

thanks mate...

0.1.3

* Fixed blank screen on some R5xx ASICs
* Added detection for G92 based 8800 GTS
* Fixed memory type being returned as DDR3 instead of GDDR3 on some NVIDIA GPUs
* Fixed shader count on some NVIDIA GPUs
* Added timeout to shut down when removing driver
* Fixed 2D clocks being shown on some NVIDIA cards
* Removed geometric clock delta returned as BIOS default shader clock
* NV42 AGP id F6 is now correctly detected
* Shortened High Tech Systems subvendor string to HIS
* Adjusted item tab order on Validation page
* Improved NVIDIA driver version detection on XP64
* Added support for original GeForce Quadro
* Fixed crash on some GeForce FX and earlier cards

GPU-Z 0.1.3 - Download

Ok..nice software.. Thank for sharing..

good one, this is a must for me to upgrade
*Added detection for G92 based 8800 GTS

Thanks for sharing..

GPU-Z 0.1.4 released, refer to first post...

goodies.. thanks 4 the head up~

still no galaxy for Subvendor ID...

thanks for the software ..
trying it now ..

thanks bro sniper69 for the software. then again the new update version of 0.1.5 has been released. do update the first post .

This is newest so far...nice job sniper69 bro..thanks!

thanks for the heads up... 1st post updated

walao, luckily it is only ~400kb, if few hundred mb with high freq update like this mana tahan
going to try later whether it recognize my desktop's galaxy gfx...

GPU-Z v0.1.6

Added GPU Sensors tab
Fixed CrossFire detection under Vista
Screenshot will now work on Windows 2000 without PSAPI.DLL installed
Update check default interval is now 1 week
Added a link to test build forum from validation page
GPU variant names removed for all ATI and NVIDIA cards. For example "G80 GTX" will be called "G80" from now on
Added several missing ASICs from families: RV610, RV630, R600
Added several future ATI ASICs
Fixed clock detection for some RV6xx ASICs
Fixed pipeline count on modded RV430 GPUs
Added ROP/shader readings for RV620, RV635 and future ATI ASICs
Fixed memory bus width reading for R200 and similar ASICs
Improved low-level BIOS reading code to work on more GPUs (pre-R500)
Added detection for ASICs from families: G80, G92, G94, G92 M
Fixed negative temperature readings in ADT7473 sensor
Added some missing die sizes for ATI and NVIDIA
Added bus width reading for NV10
Fixed bus width reading for NV44
Fixed ROP/shader counts for NV41, NV42, NV43, G70, G71, G73
Added detection for i740, GM45
i865G correctly reports DDR memory now

Download

thanks for the update..

thanx for notify the newer release...didnt know the v0.1.6 has been out

Why everytime I open GPU it show error message "Unknown Architecture"?

you using what card?

me 2 like u..........weeeeee..........

GPU-Z is a lightweight utility designed to give you all information about your video card and GPU.

0.1.7

* Corrected several GeForce 9600 GT readings
* Switched GPU and PCB temperature readings on ATI cards when using LM63 sensor
* Some fields on the main screen will now show grey "unknown" instead of "0" when value unknown
* Fixed HD 2900 GT ROP and shader count
* Added HD 3850 AGP detection
* Added 8400 GS detection
* Fixed shader count on modded/unmodded R420 cards
* Added Rage LT Pro detection
* Fixed RS300 vertex shader count

Source | Download

GPU-Z is a lightweight utility designed to give you all information about your video card and GPU.

0.1.8

* Fixed SLI detection for Vista32 and Vista64
* Added automatic refresh of clocks and multi GPU status
* Added support for NVIDIA Quadro FX Go1400, Quadro NVS 440, GeForce 7350 KE, 7300 GT, 8400 SE, 9800 GX2, 9800 GTX, 9500 GT, 8400, Quadro NVS 140M, 135M, FX 360M, 9300M G, 9500M GS, 8600M GT, 8700M GT, FX 3600M
* Added support for G96
* Added support for ATI FireGL V8600, some RV635 and RV620 variants
* Fixed fan speed monitoring for RV6xx
* Fixed fillrate for 8800 GTS 512
* Fixed some subvendor names
* Fixed shader calculation for M68
* Process size, Die size, DirectX Support will now show "Unknown"
* Fixed crash when no sensors detected
* Fixed NV44 ROP and shader calculation
* Fixed crash when NVIDIA BIOS couldn't be read
* Added Splash screen

Source | Download

GPU-Z is a lightweight utility designed to give you all information about your video card and GPU.

0.1.9

* Fixed bluescreen when GPU-Z is started
* Fixed splash screen not going away in some cases
* Fixed crash when GPU registers couldn't be accessed (thanks tDJ)
* Fixed shader count for NV44

Source | Download

0.1.8 crash with my system..
0.1.9 run perfect
Thanks bro sniper

which version can use for vista since i'd check the compability still no vista ther...

0.1.8 no problem for me ahha but im using 0.1.9 now thx btw

Anyone know why latest GPU-z cannot detect my GC fan speed?

-pWs-

thanks for sharing....

just download it. works perfect on my pc. thanks for sharing info

seems working fine with my 2900.. TQ

my gecube say tq..haha

thanks for sharing...

never know it exist
TQ

Latest GPU-Z 0.2.0 (May 03, 2008)

first post

thanks for it

GPU-Z 0.2.1 (May 03, 2008)

thx 4 sharing. using it now

update really fast... just downloaded yesterday today another update.. thanks

it fixes detection in Vista32 and Vista64 only

just support Vista32 and Vista 64 only ??? i just download ... but could not start driver ... ??

thanks for sharing.

GPUz 0.2.2 (May 25, 2008) - 1st post

thx for the heads up!

thanks for the fast update. according to the temp reading, my notebook GPU 8400G are more higher then my desktop 2900XT.

wah so good lor tis software..thnks for shrng...