My rig is
Abit IP 35 E
p4 2.8 520
1gb value ram 666mhz

the problem is, i must lower my ram freq to 666 from 800 so i have to underclock the fsb. if the ram is cloked at 800 my download will always corrupt.

I don't know what to do. Pls help me. the benchmark is always fail.

update motherboard bios perhaps?

bios already updated

Why's it running at 44.7 MHz ?

u tell me. I oc to 3ghz

That's probably a bug.. you can't possibly be running at 200 MHz lol What does CPU-Z say ?

cpu z report that i'm running at 3.4. but i can't benchmark using lavalys.

tried superpi? or have you prime stable?

try to post the pics of your cpu-z, the ram speed, the proc speed etc2...
what vcore, vdimm used, wht fsb etc2.....

Get the latest CPU-Z and print screen it.
get the vcore,vdimm form ur averest sensor.

how the hell i get - latency ????

And if i oc to 3.0 i dun have this problem. only beyond it i suffer problem

seems like a bug on the software side,
try SiSoft Sandra

now how can my windows report say that i'm running 1.51 Ghz. The more I oc the more it goes down

oftenly i get corrupted image when i'm surfing even i didn't OC

hmm more like ure mobo cursing u and asking for better proc..

errr. i think i know what happen but i'm not sure. It might be my RAM which i set it to default (mainboard default) at 800 MHz even it's only rated 667 and value ram. My ram could be faulty already. But i test for 20 minute with memtest and no error found ?

Which memtest did u use?
Memtest86 or Windows Memtest?

Memtest. I can't use memtest86 coz i dun have floppy

LOL.
Mate, you don't have to use floppy lar.

CD-rom also can.

Download this file: http://www.memtest86.com/memtest86-3.3.iso.zip
Find a blank CD-R, extract the file u've just downloaded to the desktop, use the ISO file to burn it to a CD, restart windows, set your bios to boot from CD, then just follow the instruction to do memtest.

ok i load the memtest from ubuntu live cd. after runniong one hour, no error was detected. i'm gonna reinstall back the windows and c what will happen

help me. after several days, i get 2.79 when i'm supposed to run at 3.00.

1 hour only arr?? i dont think its enough..
btw, dya know which test should be run?

emm which test. Of course not Ecc right. I just load and test it without configure