does anyone use this type of motherboard...i just want to see your cable mangement since there's a power connector in the middle of the mobo..

if u guys have the picture of nice cable management for this mobo let me know okie..

thank you

try n check in the UV league thread...

i remember seeing a few DFi users there last time.

On YCC 61F1 casing.



On Centurion5 with cacat DFI cable



ps: Center molex and FDD connector no need to connect wan. Only if you're on SLI for power stability.

Waa nice management even can't see 1 cable crossing the board btw "sniper u use sata drive or not?

can see the some cable there lah.....USB....power switch cables
but they are nicely sleeved into black and this is really a nice effort

Both also PATA drives...outdated fella mar.... No SATA yet...

wa....sniper on the roof geng man.....nice cable management.....neat and nice

i luv that casing.
what's it's brand again? akasa? or something?

anyone else? please upload your picture here..

Unlike Sniper, I've had to connect all four mobo power headers on my NF4SLiD in order to support the SLi array...

nice rig
i like the new motherboard which places the ram horizontally instead of vertical

I would be happy if anyone could do a proper cable management with 2 SATA HDD, 1 PATA HDD and a DVD burner

Not mine

Lian Li PC-60APlus

nice setup dood

ps : wonder how much u buy the casing?

Already state not mine.

Also not mine

yeahh i know edi
its ur bro pc

Well, I've got the above setup with a floppy disk too...

But the PATA disk is in a seperate hard disk cage which I am using upside down and inside out as I wish to use with a crossflow fan rather than an intake fan... Pics are more explainatory and there are more in the homepage linked to in my sig...

waa...nice rig...

dude

saw ur aquagate mini 120mm

how well does it perform?

i

Another picture:

SCSI 320 15k Raid 5 Array with 150g Storage Drive



Power Supply Connections, Fan, and DVD-RW Drives

heh, saw this before
this guy is really pro at the IDE cables.....

@storm
I can help you do it, but is your cables sleeved?

@sniper, sure ar dun have to connect the 4 pin molex power, will it affect any of the performance if not using SLi? coz my next mobo will be SLI ready

Thanks for the offer but i can manage it and i got some idea but it will be a lame one so wait for my post after i manage to complete it

either the original CM cases did not have the frucking metal cages at the top or whoever owns this casing removed it, but it surely reduces ALOT of noise.

anyway, thread starter, the connectors on the mobo is already very well placed, still need help kah?

i just want to see other's nice cable setup only, to neat up my tidy cable motherboard...

i think everyone here is a fan of computer internals, why dont you post some of yours?

semilang, you think you could perhaps let us know where you got those pics from?
a link to the source perhaps

Ya lor...ppl....start posting ler. Support a bit mar.

I think last time we got a thread like this but died liao.

i think they originate from [h]ard forum. id recommend EVERYONE to go there and have a look. the pic quality is just lovely, the hardware lovelier still. be careful, your keyboard might be full of saliva!!

OFFTOPIC:

Im planning to put ccfl in my casing.But before that i need your oppinion and suggestion.

My casing colour is black and red.

Which option you guys prefer me to choose?

Option A : 2 white ccfl + 1 red neon fan
or
Option B : 2 red ccfl + 1 white led fan

thank you

Sadly~ this is the best i can do with on my cable management on my casing as its not easy for me to arrange 2 SATA HDD, 1 PATA HDD, 1 DVD Burner, 9 Fans

2 red ccfl without any LED fans to keep to the concept of black/red'ishness.
Third colours=beng rig.



9 fans?!?? Who in the world, what in the world?
OMG!! 9 FANS?!! U only need 3 fans if you had good airflow management.
9 fans are more over extreme hardcore overclockers dude

I think he meant 9 fans including the PSU, CPU and VGA fans...

*hopefully*

Else...that sure's hell a lot of fans.

Anyway... SATA's are MUCH easier to cable. I just gotten my WD2500KS (3rd HDD) and looking for black molex's now.

I know Vantec makes black molex kit but it dissappeared from their websites and from the shops here in taiwan. Anyone can tumpang some for me?

If you are living in a room with airconditioner then 3 fan is enough but still those 9 fan really bring hell a lot of different if you add it in all those fan. Check out my full then you will know
CLICK HERE

wut casing u using??
just use red ccfl... dont put in the white led fan....
but if u use red ccfl, its gonna be very ganas and hot looking...
how bout trying uv ccfl?

Im using thermaltake shark,
planning to mod the side panel..
im not into uv
so i decide to use the red ccfl from sunbeam

DFI LANPARTY UT NFORCE3 250GB IN ANTEC SUPER LANBOY CASING

share your picture la guys

Pic spam.

@sniper
I love ur case man, so clean and nice, tidy as well.....my guess is a Lian Li??

that's not lian li
it is YCC 61F1 casing.

owh, sorry my noobness once again

regards,
aaron

aaron: Not many ppl know about this casing.

Anyway..I think we should have a pinned cable management thread to help out everyone.

So far, among the neatest rigs I've seen around LYN is prodigy's P160 (this fella dunno hilang where di...pics nowhere to be found) and Mac's workrig (considering the amount of stuff he's got in it).

Gosh, that's a neat looking interior sniper. Switch to black molexes and black IDE ribbons and it'll be sweet. Haha, those two huge holes under the mobo edge must be super convenient. I'm gonna have to take my Lian-Li under the cutting edge soon lol.

Thanks...
Problem is the black Asus IDE cables (managed to track down a pair) is too short and Vantec's black molex kit is totally extinct in taipei di.. can't find them at all!!!

Post up your pics when ur done ya. Wanna see ur HDD suspension method

@sniper
neither can I find it in malaysia, haha, asus cables are kinda short, but black is nice, blends in with the background

Heh, when I get a camera, I will. Don't have time to be cutting my case yet tho, got lots of assignments and also final year project.

DFI LANParty UT nF3 250Gb on cheap ATX casing

* One thing I hate about this Enermax FMA psu is that the 4-pin atx power connector is sleeved halfway together with psu's fan connector and PCI-e power connector, those should've made separately
* Gotta hate the DFI cacat IDE cables
* Sunbeam's CCFL wire should have been a little bit longer, I cannot pull the inverter to the other side of the casing, nor hidding it inside the drive bay cage.
* The Thermalright XP-90 interferes a little bit with the 4-pin ATX connector, but it's fine enough.



Any better suggestions are welcomed.

ah, good enough, but change those rounded IDE cables to ribbon cables, ide are actually not that tidy, U let uncle sniper see this, he sure gonna say smth already