sorry.. wats z800? zippy800? im not into high end psu though.. no budget..... and soorry again im not arsenal fans.. jus that my housemate still dun sleep waitin for d match.. im mu fans anyway hope good luck to ur club though...

kekek tahnks for lovin it..

misregcornised fans.....
btw,z800 is sony erricson z800

haha...dont worry la...my temp is normal for prescott..after all i oc what?.. ..it also can handle until 80c before it hang or burn..but from what i know..intel never dies.

INTEL really So Tahan~~?
is it INTEL got a longer life span when compare to another proc?
interest to know about this...

my p4 2.4c oced to 3.2 already 30-40 celcius when i just boot up. on full load reach 60 celcius. how to be on the safe side?

hoongji, do at least apply some cheapo silicone thermal paste.

btw, i've got a unused small tube of Zalman's thermal paste. you can hav it for free

i did. i just found my tube of el-cheapo vantec thermal paste that came with my Vantec Iceberq fan. it was meant for GPU. but what the heck, i just applied on my CPU. seems like no difference

u apply it correctly or not? no need apply too much...

btw.. bcoz of their architecture, intel's presscott tends to express more heat compare to their counterpart, amd's k8...



ya meh? got longer life span? never heard of it though... if u take k ur proc, it tends to hav longer lifespan.. thats means less heat=longer life= donwclock it ...

haaahh...
then i rather let him do as much as "possible" when he still alive....even thought maybe he will not live that old.....and long time(he=prescoot)
btw,lowyat82,no need work?

hahah.. still studyin..today no class btw i heard else where forum says that a proc normal life span will b >10years ,if not take k finely, it wil shorten to 5-7 years.. dunno true or not though... hope some1 can enlighten me..

I guess it's pretty seldom we'll still be using a 7 year old processor. Most apps would be too taxing at that time for it.

no difference between thermal paste for GPU or for CPU actually, same thing
temps might not drop, but at least u dont have to worry about it burning

ya,agree!
i think even thought the processor can hang on in 7years,the other component like mobo and HDD already down


@lowyat82
wah,so happy,me still in the computer centre in my colledge,exam is coming arhhh....really wish that the exam are concern about all this hardware
btw,thanks for ur infomation for the processor life span coz i never thought that proc can have this long life span,really new in computer hardware
thanks

just for review..

is this that world record?

of course la man..u oc..then get some high performance heatsink...ur proc is not prescott right?...if not then it really hot reaching 60c.

he must be using dry ice for cooling i think

but plz bare in mind my statement actually is quoted by forummers ... so i dunno true or not... anyway, it can b use as reference though..

ok affirmative

here mine....with standard hsf, running 4/7......

your cpu temperature??

here's mine.
Nearly 4Ghz..
Validate on my Signature.

mine one.. max try only 260ffsb 1:1

sector clear.. im in position.. Lol

ps : u can see alot record from this cpu-z web here..

ermm ... although u can increase d fsb thus increases d core speed, do u all test its stability? so it can b label as bootable or benchable/prime stable?

i've a problem here.evertime i restart my pc, my overclocked proc will also reset to normal.why?? and how to increase my volt 4 proc??using what software.now i'm using clockgen..hope u all can help me...my spec as my signature below.

try update to latest BIOS & see how things go

maybe is Ur mobo battery gone liau.. need to change ..

-+ 40˚C on idle!

your PI same as mine eventho im running at 3GHz!!!

hmm....your super-pi timings pretty high....with my sempron, i can reach 35 secs with no problem..

p4 3.0GHz prescott can reach around 39-40sec with tight ram timing, and after overclocked to 4.0GHz, migh hit 30/31sec

very nice results for a 2.6c proc overclocked to 3.3GHz

Evogenix

i don dare to push more since stock hsf, wait i get better HSF and quality RAM module, since now im using Corsair VS PC3200 512MB............since it running smooth @ 3GHz i think that more then enough for downloading 24/7 jobs!

u using intel mobo rite?.. maybe they locked it..

ha...u using intel desktop board...so no way for u to increase the vcore...i used intel desktop board before...so i know quite a bit..u can overclock if only u use ES proc on intel desktop board.

a question
where can we get the ES?
is it didnt come at shop?

Ha,Roger that
see the record already
until now my mind still cannot calmdown
eye keep like

3.0 can hit 4.0
wow great result
----deleted-----

Original CPU/Socket: P4M266A-8235
FSB: 100MHz
Clock speed: 1.8GHz
DDR-SDRAM 768 MB 133 (256+512) 2.5-3-3-6
Chipset: VIA P4M266A(VT8751)

Can use wat software o/c?Coz im newbie.

Can be o/c or not?Coz my computer i buy 2 years ago

oc is done through your bios... but you need a good psu to get you started...cause chapalang psu will do more damage than good once you start oceing cause of unstable fluctuations in your rails...hehehe....in short kaboom will happen really soon if you OC without a good psu...

thanks .. but i want to try more higher.. have any tips?
current voltage CPU= 1.65v
Ram = max 2.8v
n AGP voltage.. is this for add the GCard voltage??

I think you could overclock your 1.8A to 2.4GHz or more. I am still having my mom's CPU which is a 1.6A Pentium 4 running at 2.4ghz. They are quite good overclockers but you might need to check the limit of your RAM.

I believe the multiplier is 18x100. Since you have SDRAM133, you could slowly raise the multiplier to 18*133 = 2.394ghz.

heh..es are actually not for sold..it's Engineering Sample processor used by intel engineer..es proc u can change the multiplier without increasing the fsb to oc..mine i get from my brother..he's an engineer at intel.

or occasionally you can get it in garage section...sometimes if you're lucky or when the time is right, people will be selling it...but from my past experience, ES dun work on all motherboards..only specific motherboards...not too sure why....

Can teach me how to o/c it?My PSU is only 350w like chapalang one...
Donno can o/c it or not coz quiet old the pc already...my mobo is biostar u8668 grand,donno u heard it be4 or not.
Can teach me?

i dont know about that..but my last intel desktop board 915gav can...also on my dfi lanparty 915.

might be lucky i guess...cause the last time people sells ES sample..they say it will work specifically on gigabyte models only...but after seeing the layout of that mobo..got turned off and decided to skip ES samples already...

btw, how is DFI boards on intel? work as good as its AMD mobos?

yups..good...no problems at all.

wats the max vdimm allowed?