hmm.. tha manual said disabled d.o.t. if u wanna oc it manually.. use d.o.t. only if u wannna oc from windows. there is installer to do this.

u mean the bundled oc software???
try oc from the bios.its more fun and hardcore.try up ur vcore by .05 at a time.

yeesss... i oc from the bios.. thats why i disabled d.o.t..... but still can adjust voltage.. its read only..

from what i understand;
oc from window, enabled d.o.t.
oc from bios, disabled d.o.t.

d.o.t. is msi software to oc from windows. but in this software got option to increase voltage.
should i oc from windows then?

well if u enable d.o.t can u change the voltage thru the bios???

no i cant.

try pm 'sis' acecombat about it.
after all i use abit not msi.i dont think i can help u further.

i think u should use bios to oc, able to change the voltage, as if you use software, i think it will only overclock as it boots into windows.

hmm its ok. tq for ur concern. still waiting reply from her though.


i am oc from bios, still cant adjust the voltage. there must be some setting that i missed.

Guys, I'm abit frustrated on my oc. Rite now I'm doing 3.35GHz @ 1.45 vcore, already tried lower vcore, not stable. This is the minimum vcore for my oc and still failed occt after abt 5 hours, lower setting failed in minutes. Does my ram have to do abt my stability issues, or I simply got a bad batch? Fenin2...

erm...hard to say...

but then seriously speaking 4x1gb is quite hard to OC compared to 2x1gb...

i think u can try with 2x1gb first n see if its really the 4x1gb is holding u back loh...

if its failed at lower vcore pump more vcore into it.
like my 2180 when i oc it to 3ghz it only need 1.365 but when i oc it to 3.2ghz it needs 1.425.from 2 to 3ghz just need extra 0.02v but another 200mhz increase require another 0.06v.

diff. processor give diff. result
usually i find any few Oc review around web then try to achieve that kind of result..
only then we know how good our processor is..

Stress-testing 3.4ghz @ 1.46 unstable, guess I'm stuck @ 3.35ghz. Just my luck

finally i manage to figure out how to adjust voltage for my setup
manage to oc up to 445x8 at 1.256 vcore, and 2.1 for vdimm, and end up unstable.
orthos for 7 second got error and ibt only pass 1 out of 5.

any idea how to stable it? do i need to increase vcore more? i see my vcore quiet low compare to others

hey hw long can this cpu last if i overclock it correctly until a suitable speed?

E2160 1.8Ghz to 3.2Ghz
8x multiplier, FSB 400Mhz

Hi guys.. me just newb to oc thing.. i just do a bit oc on my rig.. so i wanna you'll look and give some tips about my oc'ing..huhu

[attachmentid=594757]

My Rig Spec

CPU : Intel 630 Pentium 4 HT 3.00GHz (stock cooler)
Ram : 2gb Kingston KVR 800Mhz
Mobo : Gigabyte GA-G31M-S2L
Vga : ATi Radeon HD3870
PSU : PowerLogic 450w
HDD : WD sata 80gb 7200rpm

cant be expected

anyone already brought E5200?
how izzit?
post some print screen for OC pls
thank

there are some result in hardware section already....

add more vcore

*edited.
posted in the wrong section.

Need some advice. I'm switching my EP43-DS3L mobo for another board because the gigabyte board has poor overclockability. I'm thinking of getting a Asus P5Q mobo. Is it good for OC? Thanks in advance.

what's willamette average temp for idle and load? mine is p4 1.7Ghz overclocked to 1.87Ghz (+10% increment bus speed), stock vcore, stock intel cooler.

temp 48C idle and 63C load.using OCCT for stress test.

---

Added on October 1, 2008, 3:06 amupdate: i lowered the bus speed to stock back. i forgot that this board doesn't have AGP/PCI lock

wana c E5200 OC screenies...

e5200 oc by raymond

damn..wat cooler?but vcore so high..if can hit 500X8 den its ok for me

not sure wat cooler he using..probably Deepcool Killer Whale
btw here his 4Ghz clock

[attachmentid=620728]

waa mfcm become raymond's assistant already ar? hehe j/k

btw it's great seeing 4ghz and above become a standard oc range for dual core.. i believe with proper cooling, n mix with raymond's skill, his proc can go higher

too bad high clock on e5200 only can be achieve using low fsb....

GTG

hahah nor lar its jus i saw he post in DFI thread..so jus paste here since he ask for e52 ss credit to raymond

not sure about other p5q series but P5Q deluxe is awesome mobo.

Hi all I need help..

I just bought Q9550 & Asus P5Q.

Q9550 should be running 2.83GHz with 8.5x multiplier but cpu-z showing me only x6 or sometimes x8. From my previous experience this is some kind of CPU saving mode.. but I don't want this.

Anyone know where I can disable this?


[attachmentid=629821]

in the bios disable EIST.

EIST and C1E

EIST stand for? Sorry this is my first time using intel

enhanced intel speedstep technology

its their power saving feature.

what i did was disable all cpu feature in my bios.

Hi guys.. Unfortunately CPUZ still showing only x8 multiplier after I disable all those CPU feature.. It detect correct in BIOS tho ( 333 x 8.5 = 2.83GHz) but in Windows it is (333 x 8 = 2.66GHz) only.

Or CPU-Z give me wrong value? What else I can use other than CPU-Z?

Thanks

Yup.... that's wat EIST stands for.... it is a power saving feature which is activated when ur PC is idling....

Our bro here has become the walking dictionary....

why i got bsod when i disable eist? right now i run my pc with eist on.

by reading ur statement there i suppose u use the wolfdale proc but cpuz cannot detect the .5 multiplier.
its either u have to flash ur mobo bios to the latest one or u use the old cpuz.

Maybe your motherboard has an BIOS update which fixes the EIST function?

yeah i think so too.

and to Silverfire
i already find the bios but its a beta and when it boot it show the rom file no. and it said 'Not For Sale'.but it does fix all the problem that happen b4.

anyone knows how to oc q6600 wif p5n32e-sli plus???please teach me...

http://forum.lowyat.net/index.php?act=ST&f...0#entry15451675

read here first

Wolfdale is code name? If so.. I got yorkfield here.

Using cpu-z v1.47.. where can find older version?

Thank you.

---

Added on October 16, 2008, 9:38 pmTrying v1.48 released today also show no different..


v1.46 also same..

[attachmentid=632576]

bro i really think u need to update ur bios la.
ur proc has 8.5 multiplier la bro and yet the cpuz show only 8.0.

Any recommended bios?

EDIT:

btw.. it show correctly in BIOS.. 8.5 x 333 but in windows... all goes wrong.. is it really bios?

what mobo did u use???

Asus P5Q