the icon was there b4 i o/c. now when i access my device manager or network connections property, it's empty. i downclock back to my default speed, but it's still empty.

anyways, i am running at 2.73Ghz @ 1.5875Vcore now and it's quite stable. but i have got to solve the above problems now.

want to ask that what is the maximum voltage that my processor can take.
my processor is P4 2.4 B 533mhz ,512kb L2

hello expert guyz.....can P4 LGA775 506 2.66GHz /1MB/533 overclock? BTW im using AS8-V mobo and yes it uGURU.....but what max i can go? Any ex-user/current-user for thos spec here?.... Corsair VS512MB 2.5 PC3200 yep that its....TQ

Have u tried it for your self?
Have you read any of the reviews on P4 Presscotts Overclocking Results (speed/temp)

For starters maybe u can try raise .05v or .10v see which is available...then watch carefully the temp readings...if u cant read the temp readings...try and touch ur CPU Cooler...if hot as hell u might consider getting a better cooler b4 starting to raise the vcore....



I dun have the current spec...

but when u asked "can P4 LGA775 506 2.66GHz /1MB/533 overclock?" that interest me....coz all processors can be run above their rated spec....is a matter of how high it can run....in your case is better you try first then ask about the problem of what you are gettin from overclocking....

"Whats the max i can go?" question is already too much and why not try to ask question like "I've achieve the max, now what?"

mine is northwood, current voltage is 1.584V, is it save to go beyond 1.6V?

it is safe for benchmarking/overclocking satisfaction.. not for 24/7 use.. watch out ur temperature for not going ~60degree~

hello fren,

sudah overclock ka!!
warranty VOID!!

i did 4Ghz with tat board..15 x 267mhz.

ur 2.66ghz with 20 x 133mhz.

its all on ur proc how far can go lo..
fsb 200mhz sudah 4Ghz lo.

[attachmentid=85126]

OC didnt void the warranty.. Unless u burn it.. What is the current temperature for that speed?..

ya i know..but personal warranty void cos the board is mine previously..i sold it to him few days ago..
temp was good..idle at 40ish..load at 50ish..

owh i c.. but the temp look good still.. maybe he can add more juice to burn it..

can any one tell me which software is best for monitor the system temp?
thanks

motherboard monitor...hehe...best universal monitoring tool for AMD and intel..

everest and motherboard bundled software

mbm5... cool monitor.. http://downloads.guru3d.com/download.php?det=204

Hello OC senpai's,

Im using 2.8 Ghz ESample codename cranford,mobo is Giga 8ipe775/g 865 chipset,512x2 dual channel kingston KVR ddr333 winbond chip,psu just CM extereme power 430watt...temp idle to load is 44-54c...thinking of oc to 3.2 with stock fan is it safe?Water cooling vs air cooling?Water is better rite?Coz a sycthe ninja is around rm2++ i've got and offer from a fren selling his wc set(CPU,GPU,Northbridge) for rm300.Plz advice thnx all

PLz be gentle im a newbie ere hehehe

someone bulking the ninja for RM 17+ only.. i dun know it still open for order or not.. why not u try to push ur procs to 3.2 n see what is the temp 1st?.. for the wc kits perhaps u can specify the accessories come with, for dat RM 300.. the brand/model for them i mean..

Well its seems a failure i cant boot now..theres a beeping sound very fast ones..so where did i do wrong...ermmm

wah! soo many sifu help
but which one should i take
btw i'm using intel proc

for me MBM 5 will be the better choice.. but different people diff taste.. try them out n picks one that best suite to u..

ok ok
i'll try the MBM 5 first
thanks

want to ask that every CPU hv maximum clock speed that can operate?? over the clock speed will burn the CPU ???

i'm using the same processor as u...i think i'm reaching the processor limit....3.4 is the max clock i can get..beyond that...it wont boot...3.5 still can boot..but not stable...i dont know actually why..i think maybe the processor limit..also same thing happen when i increase my fsb and raise my multiplier..still wont boot beyond 3.4...if u all sifoo know why please tell me...i'm a newbie too...

ur specs:

|------|::::::::::>--------
Pentium 4 Prescott (LGA775) 2.8ghz(ES)@3.4ghz
Thermalright XP-120 + DeltaTriblade 3400rpm [idle=37,load=50]
DFI Lanparty UT i915P T-12 >>>915 chipset (no good for overclocking)
Sapphire ATI Radeon X800GT 256 GDDR3 oc[560core/562memory]
Kingston Hynix BT-J/D43 512 x 2 |2.5/3/3/6|
Western Digital 80gig SATA
Atrix Powerlogic Extreme Power 500T

excuse me ..what kind of cooling system/heatsink do you use??

thermaltake silent tower with 2 fan..1 x suck , 1 x blow..

clear the cmos then..

U hit 3.4 i just try to oc 3.2 then caput cannot boot edi haiya 3.0 was stable...ermm wonder y?did u increase the voltage?Newbie also ma...

Bro is this ur pc? coz my fren claim that he helped you overclock it.. just need some comfirmation..

go n verify it a xtremesystems.

lol, looks pretty fake to me
btw, that was from page 2, suddenly now bring that back up

How come ES processor cant OC much than the normal ones?
I tot ES is better!Can anyone tell me with mobo can support ES 775 proc tat have PCI-E gpu?Best for OC also stable?apreciate it

MY RIG
P4 2.8 ES 775 + stok HSF n fan
Gigabyte 8IPE775/G
512x2 Kingston KVR DDR333@400 winbond chips

nizam wat spec ur using?care to share?

I"m newbie anything OC but got ineteested while reading this forum.

I have a Intel P4 630
Prescott
LGA775
Also,i'm using a I-cute casing with 450w PSU.
MY mobo is the MSI PM8MV-2
Can I still oc the CPU abit more?
I wanna get the most out of it..

ES is a short form of an engineering sample for those who have no idea what it means. Basically the difference between ES and the retail is just simply the capability to play with the multipliers. Or in other words, the multiplier is not locked, so the more straightforwardly it's for you to optimize your settings. So there will not be any case where "my processor is holding me down, so I can't get the full potential of my TCCD".

ES is better in terms of more GHz doesn't exist in my book, but in terms of optimizing yes indeed. Maybe what you have heard is basically ES is better in terms of optimization of settings.

Sifu,
Could u be more specific by wat do ya mean by "optimization" there..thnx much appreciate it.sorry to trouble u..
Im still learning ere

yes...same as sex....

some can stand longer but only one shot....
some can a lot of shot but cannot stand long...
some has long but not strong...
some has short and can stand strong...

so answering your question i hope that u understand that NOT even the same batch,steepings,sllicone,wafer,chocolate chip processor can perform the same....it depends on the technique and a whole lotta luck....

Burn CPU....high clock speed don burn the CPU...high voltage does....




hmmm...i wish it was mine....




unfortunately we can't(and if there is he wont be reading this post coz there is no reply from him...)..All components performs differently compares to its brothers...

the best way is to learn the technique (again like sex) then see the results for your self.....I dont think you wanna us to see while you 'do it' right....So stick with the technique and ur be safe....

What is the technique u may ask????Well read stickies...




can...push the FSB bit by bit...do it in BIOS...untill u cant reboot....then recover by lowering the FSB it down again untill u can pass POST and boot into windows...after that try stability test such as Prime,Super PI,CPU Burn....Try to see if the test failed among ur overclocked FSB/....if fail lower down a little until you can pass around 5 hours of stability testing....

for more info read the stickies at the main Overclocker United page....



Its how you make the most outta both worlds...(again sex) like if ur short, try not to use doggy technique coz it will make it unreachable....

same as overclocking....

lets say a 3000mhz P4 with 200FSB x 15 multiplier....(imagine that the proc is ES)

then after a lot of testing you found out that your proc works best with a 275 FSB increase....but the proc wont be a stable as the Ram (assume TCCD)....so:

275 x 15 = 4125MHZ (WOW) but remember...ur proc is unable to work as high....Jus say your proc works best at 3500mhz...so you will either drop the multipiler to 12 which gives you 3300mhz or 13 which give you 3575mhz speed...which is 75mhz more clock than u r stable at...but still can be counter by vcore increase....

So its better to have a test on all the components to see which is which needs 'optimization'. The use the ability of the ES to control the Multiplier which is crucial in determinating your result...

Thx zth,i've dl Super PI but Burn CPU 1.3 got SH3 and Console.Download which one?

One more problem...I dunno how to use Super PI...

How increase the CPU voltage?

i cant really remember whats the exact name coz now i'm in the office....try googling for CPU Burn-in....



easy...just select how many kilobytes or megabytes of calculation you want to do then just hit ok!...normally for stability ppl usually do test for 32Mb Calculation....




shut tha damn thing off.....

use Multimeter to test....its better and more or much less accurate...

p/s:

no need to post 3 times next time...

CPU burn-in...,32mb for stability...and multimeter - Gotcha and thx! haha ok,i'll make a more proper post nxt time ^^

just say i accidently click 'Add Reply' but you got sumore stuff to ask/say...just hit edit button on the right side of ur post...

that was not my pc, some japanese did it. I just post as reference.....here the forum link

Ch33r5!

tone, i able to OC my P4 506 2.667Ghz to 3GHZ with your Abit AS8-V at standard HSF!!!...CPU at 40C idle!!!

really crazy...well..they are extreme ppl by the way....

Not my board anymore..its yuor now..hehe..
push more..temp is good!!

Hi guys,..

Is it normal for my temp to go from 53C at load to 65C just by openin my winamp visualisation.I just put in artic silver 5 but just using stock HSF.idle at 44C.

your temp is normal for prescott...no need to worry..if it reach 70 its quite hot...if your using artic silver 5 it takes about 200 hours to actually "masak" or stable..

my 2.4c D1 is currently overcloked to 3.2Ghz. ram timing is 2.5-3-3-7 and divider 5:4. my ram is OCZ platinum EL PC3200 rated at 2-2-2-5. my processor is running on stock HSF and just recently i have cleaned the surface of the cpu, so there is no more cooling cream, only pure contact between the cpu and heatsink. on idle, the temperature is 40 while in full load it's 50. so far so good as it is stable and passed all tests.

my question is can i go higher without risking of damage to my cpu. how high can i go with stock HSF. i'm sure i haven't hit the wall yet, but i don't dare to push higher, risking my components.

any advice will be appreciated

wooo no thermal grease...i dont know what to say man...just make sure ur keep an eye on your temp...it maybe risky if u dont put some thermal compound...the heat cant flow to heatsink efficiantly if no thermal compound i think ...let see what other people think...

when i say 50 celcius on full load, i mean the temperature of the heatsink only. that's where my temperature probe rests. but i don't really know the real temperature of the cpu