Your system is not stable that's why reset back to default settings, did u test it with Orthos?Sometimes Orthos can fail even after 3 hours lol, i only tested mine for 30mins then play games already , well here's mine at 3.08Ghz, don't want to go higher cos it's getting really hot. Need to use around 1.35v to run at 3.2ghz


Specs
DS3 Rev1.0(Earliest version )
Crucial Ballistix Tracer @2.0v
vMCH +0.1v
Vcore manually set at 1.325v
The rest all default
Load temp around 62c

Still better than me, i'm using 1.5V to be stable at 3.2GHz. Haven't test lower voltage but so far this looks good. 1.6v is really too much. Tried tighten the memory at default voltage to 4-4-4-4 and looks fine too after some CMR:Dirt demo games played by my nephew for almost 2 hours. I tried 4-4-4-5 at 1066 with Option 2 but memtest fail a lot after around 70% sigh at 2.3V. Temp around 40C idle now, hot day, full load gaming around 50C, dual core stress using Intel TAT around 70C.

Here's a pic.

---

Added on June 24, 2007, 11:59 pmMore benchmarking just to confirm. I only did 10 minutes per test though.


Memtest passed at 4-4-4-4 2.2V.


Orthos Gromacs cpu stress test.


Orthos FFT cpu stress test.


Orthos Blend cpu and ram stress test.


Intel TAT cpu stress test. Always gives the highest temp of all. Why ?

Oh and i got 3 questions:

1. I set my TRAS timing in Bios to 4 but how come in windows still detect as 5 ? I have to use memset beta to set it to 4. Any solution ?

2. Why some apps seems to read my clock wrongly. Even windows itself is recognizing my machine as running at 3600MHz. And Core Temp reports me using my older FSB setting of 450x8. Any idea how to fix this reading errors ?

3. What is this temp ? Northbridge and Southbridge ? ... oh and why speedfan fan reading is always wrong ?

P35-DQ6 ...read temp form iTAT accurate ?
mine e6600@3.65@1.520v 100% iTAT load 62c....too hot ?
but 2xprime only 55c...

Kinda low, you should try lower timing, maybe 4-4-4-10 or more extreme at 3-3-3-8?

Is tat reading is Tjucntion or Tcase? If Tcase that maybe too hot. If Tjunction it is still ok.

I hav tried on my quadgt before and get 4.11GHz using Celly D 347, super PI 1M was 32s++. Nearly AMD64 @ 2.8GHz. What a netburst.

TAT and CoreTemp showing similar value. Plus/mimus of about 1-2degree

Sorry for the bump, but any assistant?

That kind of temperature seems a bit high for a E4300, i believe the thermal characteristic should be very similar to my E6300. When i was using stock cooler, clocked at 2.8Ghz@1.325v it's only around 60c load, using Artic Silver 5

walau eh... the board i using is not an overclocker's choice ler... juz testing the performance of a 945 wif celeron... and it's proven to outperform amd X2 3800+ on sc939 nForce4 mobo...

any comments on this...? it's my personal rig...

oops... will update wif better color theme...

Can someone please answer my questions ?

Sometimes this problem can be very complicated. How bot e-mail to Speedfan author and mainboard manufacturer to solve ur problem.

I'm wondering, why is there such a high differences between a Gigabtye's Hardware monitor, SpeedFan, Intel TAT and CoreTemp ?

Using my pc for testing,
Gigabyte = avg 30-40 degree
SpeedFan = avg 40 degree

Intel TAT = avg 50 degree
CoreTemp = avg 50 degree

Gigabyte is measuring of cpu temperature. I not sure about SpeedFan.

But, Intel TAT and CoreTemp is measuring based on ur DTS of the processor which is the hottest part in the processor itself. That why Intel TAT and CoreTemp will report more higher temperature than others.


-pWs-

Just try the maximum theoc this value proc can go...

Hi guys, im planning to get a e6600 and oc it to about 3.2ghz (400*8), but im not sure which board i should get... my esys are on dfi infinity p965s, but is it better to get a gigabyte p965 or a gigabyte/asus p35 board instead?

p/s: for ram i'll get crucial ballistix tracer pc6400.

to gigabyte user,im not sure anyone mention it b4 but i figure out this
for the ram divider
x:y,take y*2 and then divide by x,then u will get wat is shown in bios
for example
2:3 divider
(3*2)/2=3.00

If u love infinity series y dont ya wait for p35 version, dark series. Nice upgrade planning there.

hey guys...noob here...wanted 2 ask y'all if i change the fsb: dram ratio to 2:3...
and how do i oc my ram...
thanx 4 ur help

intel price drop again on 22 July....C2Q6600 will be under 1k...

Here's my so and so result...

i guess this is max i can do wif 1.28V... moving to next stage...

Just started to try out OCing. Using stock cooling. Anything to comments/tips?

Your mobo have 1066FSB strap? If the divider setting is under 1066FSB strap there should be more room for overcloking.


18 days left + 1 week to have the revised price in LYP.

How bout stress using 32M superPi? I wonder its stable undercolt at this speed.


Nice attempt. But it still long way to go, u can go way higher than this even for stock cooler.

hehe... i don think it's gonna be of any prob... i've been playing C&C3 and Stalker for hours at nite wif it... will sacrifice a few gaming time for Super_PI 2nite... wish my rig luck...

1066FSB strap?...ermz...not sure...hehe...using abit il8 mobo...

IL8 using 945P chipset so I think dont have 1066FSB strap.

oh okay...thanx...

here's the update i promised... been kinda bz lately...

BTW i left this running while i sleep from 12am to 9am... so it's certified rock stable...
Gigabyte can...

processors price drop then mobo will drop kar...?

Not necessarily. But if new technology come out the price will be similar like previous generation like what P35 does to 965P...

Anybody having cheaper gigabyte mobos besides the P35-DQ6? Like P35-DS3 or P35-DS3R?

What's the average overclocking ability of this mobo (fsb), especially the DS3? I'm planning to get this mobo together with the E6750......

Not much review on DS3 although some reviews on DS3R showed that this mobo can go up to 500Mhz on FSB.....

My DQ6 could do 600FSB but right now i am limited by my CPU...running stable 4.3Ghz on a e6600. DS3 should be able to have the same performance. Heat is ur enemy...always have a good cooling.

DS3's heatsinks is nothing compared to DQ6. I do hope that the DS3 can be a good overclocker too. I know DQ6 rocks but so is the price

As for cooling, I'm going for the xigmatek S1283!!!

err... my CPU-z show tat my rated FSB is 1600... does it means 800...?
refer here...

u tested 600fsb?but limited by ur cpu?if ur cpu is limiting u then how u know it can do 600fsb?
sorry..i don really get wat u mean

hey... DS3 is a good mobo also.... using it right now. so far don hv problem with the board. hv done 100%OC.

i don see mobo price drop juz replace and high intro price then slowly stabilize...

It's running at 400Mhz quad-pumped = 1600Mhz. I don't have an Intel rig (YET!) but I think that's what it means.....



100% OC meaning your FSB is at 400 Mhz right? Or did you lower the multiplier?

BTW, how high can the FSB go on your DS3? Really interested to know.....

If I get the E6750, 400Mhz only means that I can OC 8x400=3.2 Ghz only!

I want to go higher! Of course, hopefully my proc can go higher.......

oh god , i cant read ur cpuz detail ! mess

@kmarc, 100% oc means doubling the clock speed. Or maybe some people have their own principle...

already updated lar... tat's the end of my 1.28V OC... now moving to higher voltage... forgot to bundle my screenies wif core temp... showing 56-58 at full load...

I know what he meant. 100% meaning from 1.8 Ghz to 3.6 Ghz. If he used 9x multiplier, that means he would have to increase the bus speed from 200Mhz to 400Mhz, wouldn't he?

That "if" he use 1:1. But maybe will use devider for FSB, then CPU clock cant be 100%.

Any result of P31 shipset mobo? Gigabyte have p31-DS3, cheap mobo with solid caps. I wonder if they sell around RM350.

not forgetting the proc's limitation... my proc can't get 9x multiplier...

Nope... no news from supplier yet...

mine can't get to 8x multiplier...........

i've got a problem ere...i hope somebody will help..
as you all can see on my specs below..i only manage to oc e2160 to 210mhzx9, that is a shame becoz this cpu can oc near 100%.. i donno whats wrong but at 211mhzx9, the screen goes blank..but it log on to windows..i know it has log on to windows by hearing the windows logon sound..is it faulty gc, mobo, ram, or my psu not 'strong' enough...

lot of thanx to somebody can help...

try bumping the fsb to 310mhz