Ok.. Now my problem is system auto-restart after OC.. I just bought new PSU oni.. maybe still not enuff juice..


PowerLogic Magnum300 300w True/pure power 600w max
Pentium 4 2.8E HT Prescott @ 3.06Ghz
MSI PM8M-V 800fsb VSL Motherboard
512mb DDR400 Pc3200 @ 219Mhz
Geforce 6600GT 128mb DDR3 @ 519/1160

My CPU idle temperature is 41c and the graphic card is 51c without OC.
After OC the CPU is 51c and the graphic card is 55c.
Problem is whenever i start 3D application. It runs for a moment and then the PC restarted. I don't think that temperature is going to cause any trouble. I was wondering if the 300w Pure power is enuff?

PowerLogic Magnum300 300w True/pure power 600w max

^ 300w ke 600w?

try change the psu .. get 450w ...

Freak`

The Power Logic PSU always written like that,true power of the supply only half of the pure power at max. @Amedion why not get the one with 450w at least.What's your budget to get new PSU ?

Actually i dun wan spend so much on PSU.. i tot that's the true power.. 300w.. it is listed there 300w PURE/TRUE power and 600w is the MAX power.. I got think of the ATRIX 500W pure power.. but then i heard someone said it's lousy also.. RM165 wor..

go get antec / enermax bro .. spend some for psu if u want to be safe..

Freak`

get delta

ur oc not stable lar..tats y restart..
try run stock if the problem still persist..

if u got the item in hand, the best way is try it first..
u can always google for some result..

You can check on the +12v rail see it is stable or not.

it's 12.03 ~ 12.09 .. between that.. is that stable ?

During load also maintain as the level?that's considered stable.But how much or max current does it supplies?

how to check ? i dunno lar..
i got CPU-Z and prime95...

see the sticker of ur psu..
there should be a table show u max ampere it support...
for each voltage..
and max output watt...

later if any1 wanna help to enrich information of lyn, can contribute a list of ATX PSU standard by intel.

should be enuff ma..

Wait.. i provide the PSU information like what's stated on the box..

Voltage 230V (+3.3V = 14A) (+5V=28A)
Current 5A (+12V=18A) (+5V=0.5A)
Frequency 50Hz (-12V=0.8A) (5Vsb=2A) (P/G=OK)

tests new p-d775 -930-4.3 g

how to oc kau2 this ?.......... i m amd just change it .................

baru belajar....

- mobo-MSI 865PE NEO2 - LS
- Ram - ddr 400 pc 3200


oc just set ddr400

GOOD OC TRY + CPU VOLT....

Damn it.. jealous so many people can OC so high..

Hehehe.... that not cool if you say that word .. keep in try dude. Even if your result are only get about 3.xGhz something... you already put u're system to an OC envoriment right? Afterall youre have OC u're so it was a great job

BTW, keep in mind when trying to push your proc :-

• Voltage setting for RAM and Proc
• Timings setting for RAM (this important dude!)
• Try to give ur system a better air-flow envoriment (cable organizing, internal air-flow through system...dll)

Yeah...

Retired from OC files.. must be EX-PRO..
Will change my PSU or Motherboard first then only try higher..

Hi everyone..Anyone here used a P4 550 3.4GHz proc before?mind sharing how good it is ar?thanks..

my foxconn intel socket 775 ati Xpress 200 sucks at overclock.. i'm using it to overclock my celeron 2.8.. just barely reach 3.3 but keeps changing back to default 2.8.. anyone uses this board?

Im using Foxconn 945P7AA-8KS2 and its a 945P board.Oc-ed my P4 511 2.8GHz and managed to reach 3.1Ghz max nia..

same like mine

just got patriot 2X512 ddr2 667 ram. wanna test on my abit il8 2nd rigs

so we need to anti foxconn now!

post some screenshot ..

Freak`

wana oc my current CPU, 2.4Ghz, then how much i should put for the vcore?
how far i can reach for my spec?

P4-2.4Ghz, prescott, revision= C0.

Click here.

raise ur fsb 2mhz at a time > prime atleast 10 min or more to see wether ur system got err0r or not .. repeat the same step until ur pc is not stable / cannot boot / auto restart after get into windows.. reduce ur fsb abit like 5mhz n then start prime for few hours to see wether ur system stable or not..

Freak`

actually my proc is 2.4A? 2.4C or wat? i have found in the intel website, the only 1 which is match with my proc spec is 2.4A, is that true?

btw, i m using the stock hsf n dunno wat brand of psu, idle temp is around 45 n full load temp is 61. So, if i keep on oc, will it bring any damage to my cpu?

1 more thing, the FSB:DRAM divider is 4:5, how do i change it to 1:1? i m a oc noob here, so if got any wrong, pls correct me. thanks!

google for cpu-z .. download .. it will show what type of proc u have .. prescott or northwood..

u dont know what spec of ur pc bro?? better get to know ur pc first before u oc .. if not .. mayb u can fry ur proc / hardwares when oc ..

get a good cooler .. i assume that ur proc is prescott .. mine prescott too .. darn hot..

about the divider .. look in the bios .. got option there ... btw which msi mobo r ya using?? 865pe chipset right?

Freak`

i got checked by using cpu-z, sorry s didnt mention b4. but which 1 should i refer to? revision?model?stepping?

my mobo is MSI i865PE Neo2-PS. the proc is prescott, is quite hot but condition bcom better after i jus clean out the dust and apply the AS5 thermal compound....

u using i865PE oso, so izzit it cant lock the pci/agp speed? i look at the bios setting, dun hav such feature....

CPU-Z

im using IS-7 E.. oh.. forgot to tell u that u must lock ur pci/agp.. if not ur pc gonna crash becoz of that .. never use neo2 .. just look around in the bios ... it should be there ..

Freak`

i jus checked my mobo, it reli cant lock the pci/agi. so when i raise the fsb, the pci/agp will raise together. since my mobo cant lock the pci/agp, so after i raise the fsb, i set the pci/agp to the default value, 66.66/33.33, is this way working?

yea .. just set it to that value .. raise ur fsb until ur system restart / cannot boot into windows ... then decrease like 5mhz n prime it .. if not stable when prime .. decrease a lil bit .. until ur system stable at prime test..

Freak`

Only good mobo can have that kinda function.. think i btter change edi..

anybody noe hw much is the ratio for FSB:vcore i need set if i OC my PD 805

any other thing i need 2 take care?coz currently i m using stock HSF(with a 12cm fan blowing the HSF)..oni can push till 2.8..if 3ghz,the temp will increase till like 49-50C..scary sial

thats ur idle temp is it? or its load temp ?

Freak`

yes..idle temp

any cheap and good in oc mobo for conroe to recommend?selling off my rig to buy conroe soon..

hmm..is that im asking in right section?

my first oc attempt, not da highest but still in progress pushing my proc .. running on stock hsf.

Perhaps can see it under Prime95 and see the temp.

hi all gurus...
hope to get some advice. thanks in advance.

here's some info of my P4 captured with CPU-Z, anything I can tweak to serve me better? smile.gif

CPU
[attachmentid=123215]

Mobo
[attachmentid=123216]

RAM
[attachmentid=123217]

SPD
[attachmentid=123218]

I think the RAM speed is a bit low.. isn't? please advice.

guys by looking @ my spec do u think can OC ?
default is 3.0ghz...

post a cpu-z for poc n ram.that will help getting clear view.from ur spec why not.bump up the fsb.

i had post mine at Post #1045, can you help to see if anythign can be done?
thanks!

*****************************************************
Pentium 4 531 3.0Ghz@3.75Ghz@1000Mhz FSB(1.55Vcore@Stock Intel Cooler)
ASUS P5ND2-SLI Motherboard
2x512MB Corsiar Value Select DDR2 533Mhz 4-4-4-12-16-1T @ 667Mhz 4-4-4-9-9-1T(2.05V)
2xWestern Digital SATA2 80GB Striping Raid
1xMaxtor Diamond MAX10 SATA 160GB
Albatron 6600GT
I-cute 480W PSU
*****************************************************

can i use the easy tune to bump it up?

Specs And Technical Data. (All Must Be Filled)

-Original CPU/Socket : 478
-Stepping : 3
-Date : 2004
-FSB : 533
-Clock Speed : 2.4 A
-Voltage (CPU/RAM/Chipset/AGP) : 1.5
-Chipset : VIA
-Ram Type/Speed/Timings : DDR, 266 Mhz, -
-------------------------------
Results.(Min. 3 Filled)

-Highest FSB :800
-Highest RAM : 768
-Highest Clock Speed : 3 ghz
-Highest Vcore :-
-Highest VDIMM :
----------------------------
Benchmarks/Stability Testing/ Proof Of Testing. (Min 3 types of testing)
-CPU-Z Validation :
-Prime95 / PrimeTest :-
-Super PI/ Super PI MOD :-
-Memtest :-
-Sandra Memory Bandwidth : -
-3DMarks 2005 : -
-3DMarks 2003 :9468 (Ati 9550 GT OC 475/250)
-3DMarks 2001 :3450 (Ati 9550 GT OC 475/250)